Question about Jenn-Air JJW8230D Electric Double Oven

1 Answer

Error Code F8

Okay, here's what happened. I attempted to use the self-cleaning feature on my double wall oven. About a minute after the process began, I decided to cancel the process. I have since been receiving an F8 error on the display and a constant beeping sound from the oven. The only way to stop the beeping is to press the "clock" button. However, the F8 error remains on the display. If I press cancel again, then the fan turns on, the over door locks, and two minutes later the beeping and F8 error reappear. I have no idea how to get everything back to normal again. Please help!

Posted by on

  • 7 more comments 
  • Anonymous Dec 05, 2007

    My issue is similar to Baking Girl. Dacor oven, set for self clean, starts to beep and F8 error displays. Only way to shut it up is to hit the breakers. Breaker does not reset the F8 and now oven is on the fritz. Please advise!

  • Anonymous Jan 05, 2008

    Same problem F8 appears. Powering oven off does not fix it. Buttons seems to have no effect.

  • Anonymous Mar 01, 2008

    I'm trying to clean my lower oven (Jenn-Air WW2780-C) It turns on fine, but about 2 minutes into the cycle it beeps and flashes F8 on the wall pad. What gives?


  • roachrp Oct 24, 2008

    same prob a couple years ago. technician tried a new board, didn't work. he managed to rig the system so i could still cook with it as long as i didn't press the "clean" button. well... guess what, i accidentally pushed that button instead of "bake" and now the F8 with all its beeping, locking, and fan issues has returned and tech will not return my calls.

  • Anonymous Mar 14, 2014

    JA F8 E0 Error code will not complete self cleaning

  • Anonymous Mar 18, 2014

    Shows "lock" in green, four nonsensical symbols separated in the middle by a colon, degree symbol with "c" for Celsius, and "delay" in red. Only the bake, timer, and cancel buttons will work; all other buttons double-beep. How to reset the oven to clock display, please? Thank you!

  • Anonymous Mar 23, 2014

    microwave and over work fine. once the preheat is done or the microwave completes its cycle, the normal 4 beeps is now just one continuous beep and doesn't stop until you press end. this is a wall unit model GMC305PD. Everything else is working as normal.

  • Anonymous Mar 23, 2014

    I have a wall unit whirlpool model GMC305PD that works perfectly fine with no error codes displaying. when the microwave completes its heating cycle it normally beeps 4 times. now it is just 1 continuous beep and you must press stop for the continuous single beep to stop. same when oven is used. happens on preheat for oven as well. what could be the issue? can the beeping be turned off?

  • Anonymous Mar 26, 2014

    ALONG WITH THE FAULT CODE THERE WAS A SMALL "OK" IN THE RIGHT HAND CORNER. I PUSHED IT THE SCREEN WENT BACK TO ITS NORMAL TIME DISPLAY THE OVEN COOLED DOWN A LITTLE AND UNLOCKED ITSELF THE OVEN DID NOT CLEAN

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ned's to know witch relay to replace wich f8 problem


Hi there! Typically for such an error code, F8 or F80, there is a communication error between the UI (User Interface) and the control board (often the microwave control board). Yes you have a microwave control board in a double wall oven. This will require either the main control board or the UI board being replaced by a professional for safety reasons. I would suggest to contact a professional that partners with your manufacturer. Contact your manufacturer first to see if there are any known issues or a limited warranty for your model.

Mar 30, 2013 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

Cannot use self cleaning feature on Meile double wall oven. Get the same error message on the top and bottom oven. A giant F and fault 09.


Hi, Before you go working too hard to get you oven to go intothe self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaningoption. Thanks for the info!!

Oct 28, 2010 | Miele H398BP2 / H398B2 Electric Double...

2 Answers

Frigidaire double oven beeping and showing f8 code


there is a problem with the lock for one of the doors do they both close all the way or does one hit the latch. could be bent linkage or bad switch on lock or the control board has a bad relay on it.i need a model # to help any ferther

Dec 31, 2009 | Frigidaire 27 in. Electric Double...

1 Answer

F10 Error code on double oven.


Sir,
Check out this link

suggest to reset it by shutting off both main breakers to the stove , wait for one minute and switch breakers on again.

Thanks Good Luck
Appreciate to rate as "Fixya"

May 15, 2009 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

F8 / Convection portion of top oven doesn't work


F8 Oven door lock failure Check lock relay and door switches.

Apr 02, 2009 | Frigidaire 27 in. Electric Gallery Pro...

1 Answer

F8 Displayed


F1 Electronic oven control failure Replace electronic oven control (also called EOC or clock).

Apr 01, 2009 | Frigidaire 27 in. Electric Gallery Pro...

1 Answer

I have Fridigaire double oven part# PLEB27T8ACA with F8 code prob


wow, that is so weird...i was just getting ready to write the exact same thing. this last time mine beeped, i just kept letting it beep for several minutes. if kept on. i then went in and pressed all the buttons except for cancel and nothing happened. then i pressed the oven light button. the beeping stopped. not sure if it's coincidence or if that was what i was supposed to press. i will keep messing with the buttons and let you know if i figure it out. i will dread if it beeps all night long.

Feb 14, 2009 | Frigidaire PLEB27T9DC Electric Double Oven

1 Answer

F8 CODE IS FLASHING, OVEN BEEPING AND TOP OVEN DOOR IS LOCKED


Hi,
Seems like you found out the hard way what I wrote about in this tip...
Check it out it also contains some thing to try on how to unlock that oven..

Self Cleaning Oven Problem
http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101
Asker's Testimonial " Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! " - amymrocks

Dec 24, 2008 | Frigidaire 27 in. Electric Double...

2 Answers

Error Code F8


F8 Analog/Digital supervisory Replace clock assembly (also called the ERC)

ohhh thats not good, escpeccially with company coming, replacing the clock appox 175 for part, def wont happen by tommorow nad no you cant separate the 2 ovens both ae wired together

Mar 15, 2008 | Jenn-Air JJW8230D Electric Double Oven

Not finding what you are looking for?
Jenn-Air JJW8230D Electric Double Oven Logo

7,786 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Cindy Wells

Level 3 Expert

6063 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...