At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: 'Writing Error' during last stages of burning a cd.
Could be bad cd's ,but id say your recorder is going bad. you can try cd rw disks they work better in this case. then use a pc to copy to regular cd then reuse the cd rw disk again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually when you get a 4300 error when you are writing to a disk it means one of two things.
1. The communication from the motherboard to the cd-rom is bad. Meaning a bad or loose cable connected to the cd-rom drive.
or
2. You have another cd-rom drive installed or another IDE device installed in your PC and they are both set up on Master or Slave and the operating system is having an issue sending the data to the right device.
If neither of these are YOUR issue, then I would take the CD-ROM drive out and check it on a friends/family member's pc to make sure it's not the drive itself.
This is a disk error issue make sure if on windows you have the drivers for your CD drive(start>right click computer>click device manager) and also try an different make of blank disk.
TDK maxel and sony disks are notoriously bad on burning..
verbatin and imation disks burn without this error, stick to CD-R or CD+R disks the re-writables are notrious for not writing properly this may solve your problem hope it helps
you might need to re-install the cd-burner driver (nero). suspected also could the your dvd-rom drive faulty. contact your service center to replace your dvd-rom drive.
This error has nothing to do with your DVD drive hardware, so you can be sure your Laptop is ok. This is software error with Nero. Try and reinstall Nero or just try and burn DVDs at lower speed.
That error is (Format Read Error). Usually a MP3 problem when the disc was burned too fast, or corrupted during burn. Some writing programs dont put an initial track on the CD designating it an audio disc. I have seen Nero have many Problems with this. FYI Try burning 1x speed on the next disc, yes slow, just to see if it works. If so then gradually increase the burnning speed up again.
how can it solved?? My old mp3's work perfect, now i made a new mp3 cd on the 700 MB space, but it doesnt work anymore.. i get ERROR 23 on my display.. what to do??
×