- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your radio is made by CLARION and the only CLARION code available for free (using a serial number ) from anywhere on the Internet is if your radio also has a BARCODE SERIAL NUMBER beginning with C7000000 + + + + on a label somewhere on the metal casing.
(There are usually two barcodes on one label. The one required is the lower one )
T
If not then it will only be available from your Main Dealer or a Decoding
, the message you are getting is "amp guard". This is the mesage it will
display when a short in a speaker wire or speaker with low impedence is
hooked to the internal amp and sends it into protect mode, shutting
down the amplifier section while the rest of the unit continues to work.
you can reset that by unhooking the battery for about 10 minutes and hooking it back up... if that is an anti-theft type radio make sure you know the code and how to enter it. you'll have to set the pre-set stations again too.
Robert
Please take a moment to rate this solution thanks.
p.s. just noticed how long ago you posted this. you probably have it fixed by now... but the manual may come in handy to you
×