Goodmans w282ns silver

Has the box got a scart socket? If it has connect the VCR to that via a scart lead. If the alba has two scart sockets then use the second one. When recording set the channel as AV1 or AV2.
If you don't have enough scart sockets to connect your TV, VCR and Box, then get one of these Scart Switching Box from places such as Amazon or Argos.

try calling cable operator

If you switch your tv of at the plug the software cant do the updates. Leave the tv in standby over night and that should work.
If you do leave it on standby but still losing channels contact goodmans as you may need an update of the software

There should be a button marked source,press this then scrol to the one marked dtv,hope this helps.

maybe their is not enough transmission....

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Hi i had the same problem but i have sorted mine now. What i was doing wrong was i wasnt tuning in the analoge channels only the freeview digital ones. To do this you need to first turn your tv on. Then press the "source" button, this will bring up a little menu at the top left hand side. When this menu comes up press the "Programme +" button (the one that you use for changing channels near the volume button) press this until you get up to "TV", when T.V is highlighted just wait 3 secs and it will switch over. You will probably get a blue screen with a no signal message (you are now on analogue) when you get this blue screen press the "tune" button. It will automatically start tuning in all of your channels, at first they will be fuzzy but as it works they will become clearer. Your sky channel will also be tuned in. When mine tuned in it didnt tune them in on the right numbers though, bbc2 was on number 1 etc. If you ever need to use a playstation or something it goes into the scart connection at the side of the t.v and you need to press "source" and go up to "scart". To get back onto the digital channels just press "dtv/dvd".
hope i helped!

imtiazkhan,

The code should be 119 according to the manual.. If you need the manual you can find it at: http://www.hifi-remote.com/manuals/manual.shtml?urc22b_7

Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993

why did it get the highest raiting?? it doesent even say a solution

this sympton is cause by a breakdown in the video amplifier, ABL (automatic brightness limiting) circuit, crt circuit or in the horizontal circuit and high voltage circuits. according to your experience, it seems that a certain component is already deteriorating, when it becomes hot it looses its function. probably ic, transistor, resistor or capacitor in the above circuits. but im sure its not the tube which is the most expensive of all the parts.