PS3 dosen't work on Samsung Sync Master 730bf

Hi Kimb

I had a similar problem recently.
Lost all my data from one device.
It's a bit hard to put into words...
Sync means to syncronise e.g.. one list to another list, to make them the same.
It's supposed to sync the master with the copy
Trouble is, it often sync's the copy (0 data) with the master which makes both the same (or blank)
Some sync software keeps both copies and transfers new contacts only.... making them equal.

Check your sync settings to see which is replacing which.
You decide which is the master and always go from master to clone.

Although not Samdung G specific....

Hope this helps
Example of a program with good sync options.

Samsung sync master monitors were well known for bad capacitors, if you have a esr capacitor meter you can check in circuit, if not look for dome shape at the top of the capacitor, a dead give away it is open, also check for poor solder connections in the power supply inverter board area.

No! there is no second hand available.

Samsung Sync Master 2433BW has the brightness rectangule and monitor menu in one corner of my screen. How I disable/remove that rectangul?

Look for bad caps in the power supply, they must be bad by now.
http://s807.photobucket.com/albums/yy352/budm/Samsung%20730B/

Basic LCD monitor troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Please post back what you find.

refresh ur router or unplug it then disable your netlock or net filter... if that dosen,t help remove your router password and easy install your ps3

You need to install the driver for your samsung sync master 2033, so the the graphics will improve or updated.

it may simply be a lose connection with the monitor cord. or the monitor cord may to be replaced.

you have to re sync your playstation when you go from HDMI to regular wires.

after you connect ps3 to tv.
hold down the power buttondown on the ps3 for like 5 seconds (1 beep then another ),
after you hear a second beep the ps3 automoatically adjusts itself to whatever it's connected to.

I have the same problem and i think it's to do with the xbox because my wii works on the tv but my xbox doesn't, it says mode not supported. I heard that if you connect it to another tv then back to your old one,v it will work.