VX2 User's Manual

If you want to change a computer's sing-on password without actually knowing the original password, then today's your lucky day.

You don't need to be computer savvy to do this.
This is considering you know the ethics of privacy.

Please do not use this against anyone.
Okay, now that that's over with, here's how to change the sign-on password to a computer without knowing the original password...

Go to the start menu, then click on "run" (the command program).
Type in "cmd" (without the quotes).
Once the command window comes up type in: "net user"


After you type in "net user" it will list the user names of the computer.
You want to type in "net user" and the user name after it.

So if the username was Maya you would type in: net user maya.
After this it should say on the command window "you may change your password".

To change the password type in what you typed in the previous step but this time add the password to the end.
So if my password were abcd I would type in : net user maya abcd.
Change Administrator password using DOS Command
Use dos comand
The administrator account on a Windows machine is the main, root user name that gives full access to the machine.

Administrators should change this password frequently to avoid unauthorized access to the domain or desktop machine.

This can be done in the Windows Control Panel, or use the "net user" command in the Windows DOS prompt.

Log in to the machine using the administrator username and password.
You can also use an account that has administrator privileges on the domain or desktop computer.


Click the Windows "Start" button and select "Run" or "Start Search" (depending on your version of Windows).

In the text box displayed, enter "cmd" and press the "OK" button.
This opens the command prompt window.

Type "net user administrator <new password>" into the command prompt.
Replace "<new password>" with the password you want to set.

Enter the password again for confirmation.
Once you enter it again, the administrator password has been changed.

Test the new password by rebooting the machine and logging in with the new administrator password.

If the printer already has an IP address and you know what it is by printing a config page, the simplest thing to do is connect a pc directly to the printer using a cross over network cable. Ensure the IP address in the PC is in the same range as the printer ie only the fourth octet is different. Ensure you can PING the printer Enter the current IP address of the 9022 in a web browser and it should take you to the printers internal web page whic will allow you to change network settings. An alternative option is to use the ARP command at the DOS prompt, for this you will need the MAC for the network card on the printer, this will be on the printed network config page and on a lable on the network card. For help on the ARP command type; ARP /? At the DOS command propt on a PC. A third option is to use a software utility called SYNCTHRU supplied on the installation CD that was with the network card when new.

Open a browser.. Internet Explorer works. Type address http://192.168.0.1 See at bottom if this don't work.
Login page should open..
User ID = admin
Password = password Both of these (At least the password) should be changed from the default for your own protection. Make a note of the change so you don't have to come back here asking how to get back in..

Here is link to a PDF version of reference manual for version 6 of your router..
http://www.google.com/url?sa=t&source=web&cd=7&sqi=2&ved=0CDgQFjAG&url=http%3A%2F%2Fwww.netwood.net%2Fsupport%2Fmanuals%2FNetgear_WGR614v6_ref_man_20Apr05.pdf&ei=rCQaTeH2OpP2tgPv-pnSAg&usg=AFQjCNH6wg1VcKzb8pZaN6KQVE7gAZ44Xg

If the default IP does not work, open a command window, (Start - Run - "CMD" or Command)
Black DOS window will open.. Type arp -a into the window press enter.. If you have an Arp service running, this will list ip's attached to your pc Yours will almost certainly begin with 192.xx.xx.xx the end may be slightly different.

If you want to check your ip address just visit the http://www.ip-details.com/ & get the ip address

go to the RUN command on the start menu

Type CMD then ENTER

a box will appear
In that box type IPCONFIG /ALL

your IP will be listed in there

Using arp command (Windows 95/98/NT/2000)
From Windows 95/98 MS-DOS prompt or at Windows NT/2000 command prompt, you can use the arp
command to assign the IP address to the network interface card. It is necessary that TCP/IP is set up
correctly on the computer that will execute the arp command. Perform the following procedure:
1. At Windows 95/98, select [MS-DOS prompt] from the [Start] menu. At Windows NT/2000, select
[Command prompt] from the [Start] menu.
2. Execute the arp command. For example, if the MAC address of the network interface card is
00:11:22:33:44:55 and the IP address to assign is 192.168.0.128, then input as shown below,
and then press [Enter].
(Example: C:\>arp -s 192.168.0.128 00-11-22-33-44-55
3. Execute the ping command for the assigned IP address. In this case no response is returned
from the network interface card.
(Example: C:\>ping 192.168.0.128
4. Turn off the main power supply to the print controller and the main body printer, then turn it
back on.
Chapter 2 Setting Up the Network Interface Card
2-4 Konica Network Interface Card INSTRUCTION MANUAL
A Status Page will be output. Check that the IP address is correctly set in the list. Or, when about 5
minutes have passed after having restarted the print controller and the main body printer using the
ping command, check that the network interface card responds correctly. The ping command is also
executed at Windows 95/98 MS-DOS prompt or Windows NT/2000 Command prompt. The example
of executing the ping command is shown below:
(Example: C:\>ping 192.168.0.128

To check your IP you need to Go To Start Rum and type cmd and enter
You will find a DOS screen poped up . you need to type Ipconfig . It list you your IP. You need to have a local admin to change your IP

Check first the cables and connections, and the broadband filter.

You need to connect through cable to configure the router.

To access the router panel you need to input the router IP address on Internet explorer bar.

default IP is http://192.168.0.1

If IP is not default, you find out IP by opening the command prompt from start menu>>all programs>>accessories>>system tools (that kind of dos mode). On command prompt type ipconfig/all.
The default gateway is router IP.

On the router access panel default settings are :

User Admin
Password leave blank

See all procedures on manual below.

Copy and paste the address below on your browser address bar.




ftp://ftp.dlink.co.uk/di_broadband_gateways/di-524/di-524_manual.pdf

netsh [-a AliasFile] [-c Context] [-r RemoteMachine] [Command | -f ScriptFile]

? Displays a list of commands. add Adds a configuration entry to a list of entries.

add helper Installs a helper DLL. delete Deletes a configuration entry from a list of entries.

delete helper Deletes a helper DLL. dump Displays a configuration script. exec Runs a script file. help Displays a list of commands. interface Changes to the `interface' context.

ip Changes the 'interface ip' context. ras Changes to the `ras' context.

aaaa Changes to the `ras aaaa' context. appletalk Changes to the `ras appletalk' context. ip Changes the 'ras ip' context. ipx Changes to the `ras ipx' context. netbeui Changes to the `ras netbeui' context. routing Changes to the `routing' context.

ip Change to the 'routing ip' context. ipx Changes to the `routing ipx' context. set Updates configuration settings.

machine Sets the current machine on which to operate. show Displays information.

show alias Lists all defined aliases. show helper Lists all the top-level helpers.
Available commands after you have entered the netsh command (typing netsh at the prompt and pressing enter).
.. Goes up one context level. ? Displays a list of commands. abort Discards changes made while in offline mode. add Adds a configuration entry to a list of entries. alias Adds an alias. bye Exits the program. commit Commits changes made while in offline mode. delete Deletes a configuration entry from a list of entries. dump Displays a configuration script. exec Runs a script file. exit Exits the program. help Displays a list of commands. interface Changes to the `interface' context. offline Sets the current mode to offline. online Sets the current mode to online. popd Pops a context from the stack. pushd Pushes current context on stack. quit Exits the program. ras Changes to the `ras' context. routing Changes to the `routing' context. set Updates configuration settings. show Displays information. unalias Deletes an alias. Examples
netsh Enter the netsh command. netsh dump Dump all the network information as a script to the screen. Can also be sent to a file by doing netsh dump > file.txt . This script can then be executed using the exec command. set address name="Local Area Connection" source=dhcp Set the "Local Area Connection" to DHCP. set address local static 10.0.0.9 255.0.0.0 10.0.0.1 1 Set the local address to Static. netsh interface ip show config View network ip configuration. Below is an example of what may be seen. Configuration for interface "Local Area Connection"
DHCP enabled: Yes
InterfaceMetric: 1
DNS servers configured through DHCP
WINS servers configured through DHCP

Nore than likley that is the default LAN IP address that came with the device. It has probably been changed during the initial setup. A quick way to tell is go to your start button/ select run / type in the run box CMD / this brings up a dos shell in the dos window type IPCONFIG and hit enter.. Note your IP address and your default gateway.. " the default gateway is your device in question. make sure your IP address matches your gateay with the exception of the last 3 octects. so it should read something like this

IP Address 192.168.1.50
Subnet mask 255.255.255.0
Gateway 192.168.1.1

My guess is that your not on the "1" network but the router is handing out a different range of address if that is the case in the dos window type ping (the ip address of your default gateway)
like so ping 192.168.X.X where X = the octet values of the default gateway listed in the dos window

If it replies then your talking just fine you are simply trying to access your router via the wrong IP so take the IP of the gateway listed from the ipconfig command and put that number in your browser.

If this is not the case then we need to go in a different direction with this.

MilToN
CNA,CNE,MCSE,CCNA,Network +