New "Foxconn G9657MA-8KS2H Motherboard" but nothing on monitor

Your new Foxconn motherboard Primary Graphics Adapter settings in set to onboard vga that is why there is no display in your monitor. Do not install yet your agp video card. Use first the onboard vga of the motherboard.
Power up your computer and go to the BIOS settings. Locate in bios about the Primary Graphics Adapter settings and then select AGP. Save changes and the exit. Turn off your computer and now install the agp video card.

Dear Sir

Prees your Key-Bord Delete/f2 key

Advance Option And Frist drive In cd - dvd Rom /
Boot Option And Frist drive In cd - dvd Rom /

Enjoy Not Message

TRY CHANGING UR POWER SUPPLY,OTHERWISE IT IS THE BOARD ITSELF

attached is the layout of the moth there is a 8pin 12v rail and a 24 pin 24v.
what are you trying to do???

Please give me the full model number of you're Foxconn mother board. If you no longer have the box the number will be on the motherboard.
Example of other Foxconn model numbers. (Foxconn 865A01-PE-6EKRS), (Foxconn 760GXK8MC), (Foxconn 661MX) & (Foxconn P9657AA-8KS2H).
Type the correct model number into the window to the left of Search. http://www.foxconnchannel.com/EN-US/product/Motherboards/detail_overview.aspx?ID=en-gb0000242

If you still need help just let me know!
Good Luck!

Mike

You might not have enough RAM, (Random Access Memory) RAM is memory that the computer temporarily stores for future commands, and I know Vista takes about 1-2 GB of RAM to run, if it can't handle it, I'd suggest using windows XP.

Check in the Bios and make sure the onboard sound is actually enabled. Should tell you in the manual how.

Are you using a 80 pin super ata cable or a old 40 pin?. Have you tried different jumpers on the drive`s slave/mater/cable select?. Have you made sure that all the channels are turned on in the bios?. Make sure they are all set to auto. I know you probable checked all these things already. But just wanted to make sure that you didn't over look some thing simple.

Bad Board get new one Foxconn bad

1 check the ramm dimms..may be put wrong or one is not inserted
2 check the video slot,also check the vido card to be ok.
3I can asure you the proccessor and the HDD are ok,,so stay cool with them
4 last but not least..maybe the most important check the mainboard,of which you didnt say anything here..check the start wires and jumpers...try to reack the bios setup,look to the integrity of the condensors close to the video slot.
5 if after a keen check up you still have no positive result,well consult a authorised service.
The live specialized verifcation can do much more than our advices here.
good luck and keep me up to date with your problem
bye bye