No picture,static - Symphonic SC309C 9 in. TV/VCR Combo

Your picture tube is about to go.
If it's still under warranty,take it back.
Hope this helps.

Sound like what happened when my lamp went out of my projection tv.

If the set was purchased in the USA it has the USA format which is NTSC--unless the signal is NTSC picture will be in black and white and no sound.

If the signal format there is PAL OR SECAM you will need a converter that takes that and outputs NTSC for the set to work properly there.

Light static in picture is usually caused by a bad cable connector.
- things to check/questions:
Does it happen with all sources DVD, VCR ?
Are you on Antenna, Cable, Cable box or Satellite?
Does it happen on all Channels?
Do you use the cable input or audio video inputs?
The problem is usually not serious and is usually external to the TV

it has a short in it.u will need a tv repairman sorry

RESOLDER LOOSE CONNECTION IN THE TUNER OR YOU NEED TO REPLACE THE TUNER

sounds like a splitter problem try replacing splitters

you have a short in one of your tubes

I have the same problem that just develop last week 0 ggod picture but audio is just static Did you find a solution yet?

Protection circuit fault kicks in. No vertical Deflection (V STOP),B+ over voltage protection (OVP), This is about a $150 -$200 to fix.