Need drivers i cant find the ethernet drivers for emachine t3624

eMachines T3624 Manuals

- I wen to e-machines website and found out that there are no available Ethernet driver

- Since the chipset drivers are from intel more than likely that the ethernet drivers are also from Intel

- For you to be specific on what Ethernet driver it is you can check on

1. device manager -> left click on the plus/triangle sign next to other devices
2. right click on ethernet -> choose properties
3. from the properties window --> click on the details tab
4. there should be a long alpha numeric number starts with PCI......
5. google that up for you to find out what specific ethernet driver it is

- If the ethernet driver is from Intel here is the link:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&keyword=%22PL2KXPM.EXE%22


-- Cheers Don' t forget to say thanks

Hi

thank you for your query

Please go to the following link

http://www.emachines.com/support/drivers.html

Then choose Desktop> T Series > T3624

You will be rpesented for all your drivers, download and install the ethernet drivers

Regards
shauqat

Try going to eMachines driver support page and see if you can download the drivers for your system.
ALSO TRY:

Here are the drivers for emachines t3624 ethernet: http://downloadfinder.intel.com/scri...nm=PL2KXPM.EXE

Emachines are notorious for having faulty power supplies. If your lucky you just need to replace the power supply. I've seen a lot of them where the power supply also fried the motherboard.

Please don't forget to rate this solution.

well, if you have a built-in NIC card, usually you should have a CD that has the driver for you ethernet controller.

or you might want to visit the link below to download your driver

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3624

I think the one you need is that Intel 845GV Chipset Driver

Download (4.20 MB)

There u go!

And if you need anything else...here is the supportsite:
http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3624

Good luck

Please RATE my help for you

Nic

Shut the computer off at the beginning of the bootup process look for the function key or keyboard button to get into the bios setup. Press that button and look in the settings to disable the onboard network adaptor.

You need a motherboard that has the Intel® 845GV chipset and a socket capable of supporting the Celeron D processor.

If you are unsure how to proceed in fitting or purchasing the correct item, you may wish to seek advise from a qualified engineer near you.

i need to download on board driver of imperial_GV 20030812