How to relink joey with hopper on dish network

Go to System Info on the Joey, then Whole Home Network, then click on the Hopper you want to link to.

try getting a different kangaroo ma'am

They are meant to be that way. If all remotes would work the same receiver you would interfere with the boxes in different rooms .

Do yoy have a Smart TV? Make and model PLEASE

To change which hopper your Joey is linked to if you go to the Joey and get the remote.
If you press menu, go to settings then to network setup, selected on whole home.
Now on the screen you will see the devices listed use the remote to highlight the correct hopper and press select and then save.

Hi there joe ibrahim, my name is Kimberly and I form part of the Social Media department with DISH. In order to disable the Inactivity Standby mode on the Hopper and Joey system, press 'Menu' on the remote, select 'Settings', then 'Diagnostics' and last, 'Updates'. From the Update Screen select Disable and be sure to select 'Save'. If you have additional questions feel free to reach me at: [email protected]

Kimberly Escobar
Social Media Representative
DISH L.L.C

Hi there joe ibrahim, my name is Kimberly and I form part of the Social Media Department with DISH. In order to disable the Inactivity Standby on your receiver you will need to press Menu on your remote, select Diagnostics, and then Updates. In the Updates screen select Disable and then Save. This will resolve the issue. Feel free to reach me at: [email protected] with any questions.

Kimberly Escobar
Social Media Representative
DISH L.L.C

You need to call Dish and they will reset it. Afterwards, you can setup a new password.

Hi my name is Mike Houston a Social Media Representative at DISH. With our Duo SD 625 DVR, it cannot receive HD signal, there will need to be an upgrade to our HD duo DVR systems. If you have any further questions about our DISH equipment please e-mail me at; [email protected]

For the Hopper I have used code 0464, however, the ring around the OK does not seem to work using this code. I'm looking for one that will work everything as well.