IHP-120 MP3 after formatting IHP-120 won't allow me put no more than 200 songs? It only 1.2 G Plus I don't have any software for it! it anyway you guys could help me! thank you

when you connect your portable storage wait for few minutes to load.

i have a 30 gb hd in mine, plus i upgraded the battery..............but in your case can i suggest www.rockbox.org ............boot up in 30 sec or less, pitch control, you can customize your sound to your like... (bass,highs or etc)

hi there, open iriver again and take new drive out (reinstall hard drive, just an adjustment process). close it up and try to download / play a file.
now if this process dont work, save iriver software to pc and format the hard drive (this will erase the hard drive songs and all)..now reinstall the software from the pc...download your songs back to iriver and you should have a brand new Iriver ihp-140............if heplful feel free to rate

here u go my friend!
http://www.gomadic.com/brand-iriver-accessories-iriver-ihp-120-accessories.html

You can get a replecement on Ebay or at Maplins the spec is

In: 100-240V~50-60Hz 360mA
Out: 5V~2A

be careful I once fried an IHP-120 by using the wrong charger. I replaced the battery but taht wasn't the issue. I had it replaced with a IHP-140 and now my old charger has gone too. I got a replacement through the company I bought it from but they have none left.

Battery replacement directions are advaliable from misticriver.net.

I just reccommended a company called avsense you can find there info on the iriver website i sent mine with a wont power up and a bad headphone jack 67 dollars later its perfect again !!!! there adress is 4038clipper ct freemont ca 94538 there phone # is 1-510-445-0188

Did you reinstall the firmware? Check to see that you have a file called ihp_120.hex on the root directory. If not, you can download the latest version of the device's firmware from the support page on iriver's website. Otherwise, I suggest you try installing Rockbox firmware (www.rockbox.org).

The H140 needs to be formatted as a fat32 file system for the players firmware to recognise it. To check which file system you have formatted to connect your player to your pc and go to > my computer >right click on your player > then click on properties. It will tell you what file system you have. Windows will only format to ntfs file systems, so if you need to reformat you will need to download Swissknife http://www.compuapps.com/download/Swissknife/swissknife.htm (its free :-) )and use it to reformat your player.

Nope, you're fine, it's just like pressing the reset button on your computer/playstation/whatever. It will just restart the iRiver and once it's restarted everything will be there just like it was before :)