Question about Sanyo DS27510 27" TV
I have a Sanyo tv that is stuck on the video 2 setting and have not been able to switch it no matter what I try. The original remote was broken and I have been using a universal one up to the point I stopped using the tv.(since January as I bought a new television). I just stored this tv until now, and brought it back out to use, but when I plugged it in, and hooked up basic cable to it, it just stays stuck on video 2. The remote I have been using always worked before when switching from different video modes to cable and back, etc. Now, nothing! Can anyone please offer a solution, thanks!!
Ours is doing the same thing except on Video 1. I called Sanyo customer service and they said I need the original remote. They were willing to sell me one for $20. Here is what I did instead. I used a cable box and hooked the cable in to it. Then I took the type of cables that will hook into my video 1 slot and plugged them in there and plugged them into the back of the cable box in the "cable out" positions. It worked ! If you do not have a cable box you might try a DVD/VCR combo or a VCR. Good Luck
Posted on Nov 10, 2007
Tips for a great answer:
Usually answered in minutes!