Durabrand TV 2127N

owners manual shows tou how to use front panel buttons to get to game mode if you dont have manual search internet download manual

You have to use your original Tv remote. You cannot use the XBOX 360 remote. thats for the 360..If you have lost your original tv remote.. by a new one.

There is a setting that may need to be changed within the Xbox 360, to allow it to be controlled by a Harmony Advanced Universal Remote.

To configure your Xbox 360 to respond to a Harmony Remote

1. Using your original Xbox 360 controller, go into the Xbox Dashboard on the Xbox menu
2. Select "Console Settings"
3. Select "Remote Control"
4. If "All channels" is selected, select "Xbox 360 Media Remote”. If "Xbox 360 Media Remote" is selected, then select "All channels"

Your Harmony remote should now control your Xbox 360

Try running your game via av/hdmi - you will have to change settings on xbox so that it is comp.with the channel you are trying to play through.

unfortunately not. I had the same problem, in the end i had to go and but a universal remote (which are very cheap, depending on where you look!). After you have your remote, the code you need to sync. the remote to the TV is 210

What do you mean, no display? Is is game-related display issues? Have you checked the AV cable connection? Or is it about the settings? Is this the first time that you are going to connect your xbox console?

To determine whether the display issues are specific to a particular game, try playing a different game to see whether the same symptom occurs. Reminder, some Xbox original games that were released for the original Xbox console may show some display issues when you play them on the Xbox 360 console.

Next, make sure that AV cable is connected correctly to the Xbox 360 console and to the TV. To verify that the AV cable is connected correctly to the Xbox 360 console and to the TV, you can disconnect the AV cable and then reconnect the AV cable to both devices. Note: If you are using composite cables, do not try to set any HDTV settings. If you try to set HDTV settings, you may lose the picture.

You might also want to check your TV's settings because some display issues can be caused by how the TV is set up. To make sure that this is not the case, please check your TV's settings.

In your TV's settings, you should check the following:
- Make sure that your TV is set to the same video broadcast system as your Xbox 360 console (PAL or NTSC)
- If your Xbox 360 console is a PAL console, set your PAL settings to PAL 60
- If your TV has a type of picture compensation enabled, disable it
- If your TV's settings are correct, you may want to try using a different TV, if you have one available. Try connecting your Xbox 360 console to another TV to see whether the same display issues occur

Next, reset your Xbox 360 console. To reset the display settings to the default settings, follow these steps:
1. Remove any discs from the disc tray.
2. Turn off the console.
3. Turn on the console.
4. As the console starts, press and hold the Y button, and then pull the right trigger at the same time.

durabrand tv remote code please

try some universal remote controls!

CALL 1800 294 3889 THAY HAVE THE REMOTE

You most likely will need to have the original remote for this. Contact Durabrand or go back to Walmart and mabye they will know.