Reinstalling printer without disk

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Hi,
What you need to do is the following. First Uninstall completely the Lexmark software and all of its folders. Once you have uninstall everything that has to do with the Lexmark software then restart your computer (Make sure you do this properly otherwise it will not work) Once the computer has come back click the following link http://bit.ly/dd8LMi and download the driver for windows Vista. Once you finished downloading the driver then install it. That should fix your problem. If that does not fix it then try the recommendations on this link http://bit.ly/dko344.

Ok go here.
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US+&question=lexmark+x5340&productCode=LEXMARK_X5340&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X5340&searchid=1265176060230#2

Lexmark x5340 drivers can be found at driverupdate us.Take a look, and enjoy

go here and download, hope you have a fast connection it's almost 54 megs. good luck:
http://downloads.lexmark.com/perl/downloads/downloads.cgi

Hello

I've had similiar problems with customers printers in the shop. Generally I have found that if I uninstall all the Lexmark drivers and associated software and the USB drivers, then goto Start, run and type CMD (you'll need to have admistrator rights). At the prompt type SFC /scannow. Have the orginal Vista disk handy because it will probably need to install USB drivers. Once this has completed reinstall the drivers that came with the printer (not online). This should solve your problem, now you did eliminate any chance of viruses, malware or spyware interfering?

If you go to Lexmark's website. Under "Search by Model", put in X5340. You can download the driver from there.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
868

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printer does not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

hey, yeah you can get them right here, just select your windows from the list

on this webpage http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+Z611

if the link doesn't work

click here