Program tax rate for Casio TK 2700 - Casio Parts Cash Register PC Desktop

You need to see a Casio dealer for this part. It is specific to the printer.
-----------------------------------------
If anyone needs more information, the Casio TK-2700 manual is here: http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-2300_and_TK-2700_and_CE-4700_programming_manual.html

Key to Program enter 3 subtotal 1 tax pgm (tax rate with decimal) cash tend subtotal.
ie 7.35%
3subtotal1 tax pgm 7.35 cash tend subtotal

To change/program the tax rate, use the following procedure:

1. Turn key to Z/PGM position
2. Press 8
3. Press #/ST
4. Press A
5. Press #/ST
6. Press 2 (Auto Tax)
7. Press #/ST
8. Press 097500 (9.75%)
9. Press #/ST
10. Return key to normal mode

This procedure should program your tax rate at 9.75%

1. Press #/ST

Manual here:
http://www.cashregistergroup.com/acatalog/Casio_TK_2100_instruction_manual.html

That's strange. Try a flag clear first:

Turn key to PROGRAM mode.
Turn power off at wall.
Hold RECEIPT FEED down - keep your finger on it.
Turn power on at wall.
Wait 5 seconds, then let go of RECEIPT FEED.
You should see "FFFFFFFFFF" on display.
Press SUBTOTAL.

Here is a link to the many different Casio Cash Registers User Guide, Owner Manual, Operating Instruction And Service Handbook

http://www.devicemanuals.com/guide/Cash%20Registers/Casio-manuals.html

You're right, the manual is terrible but I think I got it worked out...
Turn to PGM mode.

• Press 3 then subtotal button.
• Press subtotal button again.
• Then endter tax rate (if even enter two digits 05 for 5%, if more enter 4 digits like 5.75 *5+.+7+5 for 5.75%) and press ca/amt tend button
• Press 0 and press ca/amt tend button
• Press 0125 and press ca/amt tend button *this is for rounding/tax table code not positive on this one but looks like the right entry for "add on" tax
• Press sub total button

This should change your tax

Hi. That's an oldie. I might have some info kicking around in storage for the 2100 if you are still having trouble. Just let me know.

Mark

turn key to PGM
1 CLK# 3 SUBTOTAL 0125 SUBTOTAL 8.75 CASH 0 CASH 5002 CASH SUBTOTAL
turn key to REG1
8.75 is my tax enter your tax instead. make sure to put the decimal point.

I'm in Australia and only going on the program manual for your area, it states that canadian tax is tax on tax? if this is true then you probably entered a code for add on or add in tax and thereby changed it all.

you need the following

tax table address
1 125
2 225
3 325
4 425

rounding off codes
rounding off to 2 decimal places is 50
rounding up to 2 decimal places is 90
cut off to 2 decimal places is 00

tax system code
tax table with out tax rate 01
tax table with tax rate and add on rate 02
add in tax rate 03
Canadian tax-on-tax rate 04

starting point
to get the starting point you multiply by 100 and subtract 1
eg 50 cents = 0.50 X 100 - 1 = 50 - 1 = 49
eg $4 = 4.00 x 100 -1 = 399

to program the tables go through these steps

go to program 3
tax table address eg 125
subtotal
tax rate
ca/amt tend
starting point eg 0.50 = 49
ca/amt tend
rounding eg 50
tax system eg 04
ca/amt tend
ca/amt tend

here you have 2 choices,

press ca/amt tend to go to the next tax table ie 225 and start over by entering the tax rate and go through the procedure again

or

press subtotal to finalise the tax table you are on

Hope this helps,

Adam