I recently bought a 2wire 2700HG-B from Digidave. My internet connections speeds have gone down from around 1200kbps (with speedtouch 330 usb modem) to 300kbps with 2wire modem. Could someone advise the problem. I've tried configuring the 2wire to the required settings ( MTU VCI) but these don't seem to help.
Re: Slow speeds compared to speedtouch 330 usb modem
How do you connect to the 2wire 2700HG? Wireless or ethernet? In any case I suggest to access the mdc (management and diagnostic console) of your 2wire and check the DSL Diagnostics under the Troubleshooting Category. Check the attenuation rate of your 2wire there so you can see if external problems are affecting the 2wire. The 2wire is also a modem\router and eventough it rarely affects the speed of your connection, the 2wire Firewall might also affect the speed of your cx. Another thing to check are the electrical interference on your 2wire. EMI (Electro Magnetic Interference) do affect the 2wire router greatly. I mean it LITERALLY. A great Interference can cut your signal strength from full bars to 1 bar even tough your just 10 feet away from the router. You can also check the Broadband Status on the Network at a Glance Page to check if the speed are jumping in and out. And also try to contact your Internet Service Provider or the 2wire direct technical support (1-877-3478680) for further assistance. God Bless!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,you can check your original internet speed with upload and download exact speed at free of cost,for this facility i am using this http://www.ip-details.com/ site.visit here for more details ,it is a total free site.
if you are using speed touch 330 usb modem configuration is like this...
install modem drivers this would installmodem drivers.
then go to start, programs speed touch>> then selest Speed touch USB then it would give you a pop up for dial up connection, click on properties, then click on configure here you can change the speed. else go back chcek username and password and dial. should be able to connect. If you need anyother information other than this please go to speedtouch.com
Unplug the plug (from phoneline) on back of USB modem, plug into Zoom router. Plug one end of an ethernet cable into router and one end into your PC. Type http://10.0.0.2 into a web browser (eg. Firefox or Internet explorer) username/password is admin/zoomadsl go to basic setup and input your ISP username and password (the one given to you by your internet provider) under PPP. Click configure my connection. Save changes and then write to flash (both buttons on bottom of page)