Televison & Video Logo

Related Topics:

Question about Humax DRT800

1 Answer

Problem for humax 5400

I have problem with my humax receiver it is not staring at all and there is three light is blinking in front of the receiver

Posted by nakuja on

  • 4 more comments 
  • azher Nov 19, 2007

    I have a HumaxIRCI-5400 receiver,I was adding a favorite channel into my receiver and it suddenly locked up and all I get is three green blinking lights on the front display. I tried switching off and on the unit but problem still there. Can any one please help?



  • Anonymous Mar 23, 2008

    when I turn it on three dots start blinking

  • Anonymous Apr 05, 2008

    comment trouver le key de humax 5400

  • topsy99 Apr 25, 2008

    can change one channel e.g. 1 to 2 then machine locks up and cannot move the channel anymore.

    i suspect has overheated in the past

  • topsy99 Apr 25, 2008

    my second humax (replacement for the one that locks up) only gives blank screen . when changing channels all the names programs etc are shown on screen. card indicator says signal is scrambled.

    i suspect overheating again.

    have reprogrammed several times but doent change anything can someone confirm overheating and that it cannot be fixed and that it should be sent to the tip.

  • Anonymous Mar 14, 2014

    Humax 5400 no programs show epg TV Receivers & DVRs



1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

This is telling you of a defect in the circuitry since this unit cannot be repaired I would contact my satellite company and have the unit replaced since it is defective.

Posted on Sep 16, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How do I tune my humax freesat remote to my tv

Hi John the steps below shows you how to use the remote. If you need more information there's a link included for the Humax website. There you'll find the codes and also setup guides.

How to use the Universal Remote Control
1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by
pressing the corresponding button on the remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 3-digit code. Every time a number is entered, the button will blink. When the third digit is entered, the button will blink twice.
4. If a valid 3-digit code is entered, the product will power off.
5. Press the OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power off, repeat the instruction from 3 to 5.
• When no code is entered for one minute the universal setting mode will switch to normal mode.
• Try several setting codes and select the code that has the most functions.

Humax 5400 no programs show epg TV Receivers & DVRs

Almost certainly due to failing PSU capacitors. This model is well known for it. It's easily repaired by a competent solderer.

How to enter keys on HUMAX 1020HO RECEIVER

There are 4 clear buttons at the top.
You need to press the left hand one . it should light up red, than your buttons will work.

Standby light mode

standby light blinking

My Humax Foxsat is just out of guarantee & the remote has suddenly stopped working. We have changed the remote batteries & it is lighting up but doesn't interact with the foxsat box. The box works...

If you still have the owners manual i would recommend looking for the section on how to program the remote to the receiver. If the remote works with other accessories that would probably be it if not you can find universal remotes pretty cheap.

I need Humax 5400 Service Manual. or circuit digram the power supply

You are asking about the service manual of Humax STB I thinks. If so, get me your email address by fixya. I can't upload it to you by this site. I'll send it to you by mail. OK.

How can I download the latest software upgrade for my Humax IRCI-5400. Thank you.


PVR9200T very slow to react to remote control

I have 5 customers machines doing the same. rang Humax today. They are working on the fix..and hope to have an OTA update at the end of the month....keep you fingers crossed eh?

Humax 5400 satellite receiver ,power suppl problem

Dear Robert...

I think the problem with my humax 5400z is similar to yours.

Both 5400 & 5400z have the same power supply unit.

I just solved it this evening by changing C9.

It's a 1500 μF 10V electrolytic capacitor. Be careful not to reverse the polarity my friend.

If you have problems to find the capacitor just e-mail me at [email protected] and I'll send you pics showing the location of that C9 capacitor on tthe psu board.

Hope this could help you.

Good luck.

Ramez Lebbad.

Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Humax Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Brad Brown

Level 3 Expert

19127 Answers


Level 3 Expert

3290 Answers

Are you a Humax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides