Foxconn n15235 mobo will not post nd gives long beep

N15235 this is no model that number is for electrical safety certification only.
post the sticker numbers on the mobo tell the true model , all of them, see SP#nnnnnn that is HP mobo
did you buy a used MOBO off the internet,just the MOBO
and no PC??????? not told that
N15235 stamp in on all there mobo every one for decades.
it means zero to you or any tech on earth this CERT
i think it is a Asian code, for sure not here USA ours is UL or RU.
here is your answer
power on and hammer Del key (if not for HP or Dell)
the main BIOS page shows now , new coin cell is a must.
then click bios default settings that resets CMOS NVRAM.
the set time and dead
then set boot order , in BIOS.
no problem stated, just nebular CMOS reset.

N15235 that is not a model, it is electrical safety certification code. useless
lost your PC casings? no PC maker names nor model told
bought a raw mobo dead? from goons on amazon. rip offs.
they sell $5 used mobo there for $100 to noobs, then why not ask the goons for your manual, oops none.

n15235, useless this.that is electrical certs number
top of mobo has stickers only THEY matter.
but sorry if is Foxconn 6627MA-RS2H (2007 made)
SiS 662
Pentium D / Pentium 4 HT / Celeron D
DDR2 667
bad news SIS is dead now and so is foxconn diy mobo support by them 2019 they ended DIY kit business.

you need the Audio port jacks from the front panel
not the rear that is a standard, green is output. end story there, pink mic. etc.
you lost the CD out of the new box I see, so lost the PDF manual there too, ouch.


then answer for pin header, marked
Audio Interface: F_AUDIO

is here

https://manualmachine.com/foxconn/6627mars2h/1611735-user-manual/

Audio Interface: F_AUDIO

For 6-Channel (optional)

The audio interface provides two kinds of audio output choices: the Front Audio, the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear Audio). If headphones are plugged into the front panel of the chassis (using the Front Audio), then the Line-out (Rear Audio) on the rear panel will go offline. If you do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be shorted, and then the signal will be sent to the rear audio port.


see graphic of jack same page.

n15235 is not a model number ever
that is an Australian, electrical safety compliance code. and 100% useless .
foxconnchannel went dead 2012.
they stopped dead DIY mobo sales, and the wiki said so too.
the manuals are all lost now./ but googling finds some. but no model told, no JOY.
lost the CD too , new in the box it had one, with PDF on CD
lost that?, yes, ouch./

or get the real foxconn, model number mobo
the google that and add the word manual
and bingo all jumpers told.

some foxconn mobo are called contract OEM mobo
the top makers of OEM PC ordered those custom and put them in their PC and the only clue is the lack of
any DIY foxconn model on the board at all.
that n15235 is NOT IT.
learn to post photos of the mobo and all labels there.

n15235 is not a model mobo at all that number is the Australian electrical safety certs.
https://www.foxconnchannel.com/

is now dead, no more books, driver, or bios forever gone.
dead.

there is no such mobo, n15235, ever, that is electrical cert code for Australia
yes bingo this: Foxconn 6627MA-RS2H ???>????
and foxconnchannel.com went dead 2012. for DIY MoBo.
winfast is product line that sells foxconn too but is dead also.....
double dead.
and triple dead if our unstated OS does not support this relic chip sets./
Foxconn 6627MA-RS2H (real name this is) 2006 made.

next time buy ASUS, and win, ok/?

the echo of the manual is there, lucky you. free too.

https://www.manualsdir.com/manuals/768416/foxconn-6627ma-rs2h.html?page=2

Pentium D is max best. here
the bad news is this lame chip not supported now.
SiS662 (North Bridge) + SiS966L(South Bridge)
966 is at vista max.
662 is ends at XP 32bit.
and 64b it.
RIP 662 , but some linux is supported. seen here/
no SSL certs but is ok there.. they ended support so did not go SSL is why and costly.

http://w3.sis.com/download/

its nice they still pay for this domain, shocking that.

so is this correct
Foxconn 6627MA-RS2H
many folks post here using wrong mobo model
did you?
n15235<<< and this is 100% USELESS max.

The LGA 775 processor socket doesn't matter, calderwooddu.

It's up to the motherboard chipset, and the BIOS program, and version, of what that Foxconn N15235 will support. I would go back to the Pentium Dual Core E2160, use CPU-Z from CPUID.com, (Free), and see what the motherboard chipset is, first.

(Motherboard chipset: The Northbridge, and Southbridge chips. Chip is slang for I.C. Integrated Circuit)

The Northbridge chip is what determines what Processors are supported.

1) http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

2) http://en.wikipedia.org/wiki/Northbridge_%28computing%29


Since the E2160 is built upon the 65nm technology, and the E5400 is built upon the 45nm technology, the Northbridge chip of the Foxconn N15235 may not support the E5400.

With the technology change are also Instruction Set changes. Plus other parameter changes. The BIOS program, and version on the Foxconn N15235 may not support these, either. Sorry to be a bummer.

Not a solution per se, Yet.

Need to know what computer this Foxconn mobo is out of. (MOtherBOard)
OR, if you get the computer operational again, let's use CPU-Z to see what the motherboard chipset is.
Need help in downloading, and/or installing CPU-Z, post in a Comment.

yeh, the power and reset has two side by side button switches on the mobo itself. small squares with small round buttons that click when pressed !

for drivers on M/B FOXCONN N15235 all dirvers go to www.quebex.com, also will include the direct link, and click on model APOLO_48XX and have fun downloading all needed drivers...

http://www.qbex.com/website/downloads.php?osCsid=83c184775bfaf6771df03e7fc3bdb41a

The foxconn motherboard is use in the HP a6600f desktop machines. they olny load vista on it. I'm looking for drivers for XPPro.