Question about Kenwood KDC-128 CD Player

1 Answer

Clock We recently obtained a Kenwood kdc 128 car stereo. Everything is working and sounds great, however, we can not figure out how to set the clock. I have searched the internet trying to obtain a user manual without success. Can you please help?

Posted by jkvlpn on

Ad

1 Answer

Mitch

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 752 Answers

You have to get into the menu. Here is a link to the manual to help you do it. http://inform2.kenwoodusa.com/manuals/KDC1028.pdf

Posted on Sep 15, 2007

  • Mitch
    Mitch Sep 15, 2007

    Here's the procedure:

    Adjusting Clock
    1 Enter Standby
    Press the [SRC] button.
    Select the "STBY" display.
    2 Select the clock display
    Press the [CLK] button.
    3 Enter clock adjustment mode
    Press the [CLK] button for at least 2 seconds.
    The clock display blinks.
    4 Adjust the hours
    Push the Control knob to [FM] or [AM].
    Adjust the minutes
    Push the Control knob to [4] or [¢].
    5 Exit clock adjustment mode
    Press the [CLK] button.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to unlock the stereo

Unfortunately Kenwood codes are only available from the Main Dealer or by using a Radio Decoding Service who will connect a laptop to read the working code inside your radio`s memory chip (EEPROM)
104helpful
2answers

Don't know how to set clock on kenwood kdc-138 without manual

change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute
12helpful
1answer

Kenwood KDC-MP208 Clock Set

Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.
1helpful
2answers

My kenwood stereo kdc-135 cr will not display the clock time.

Hold in the button that you change tracks or change radio station with
1helpful
1answer

Cant set clock kenwood kdc 2011 s stereo

Here is a manual on how to set the time page 22.

http://inform3.kenwoodusa.com/manuals/KDC3011.pdf

Good Luck

Please Rate FixYa!

3helpful
1answer

My car stereo

In standby hold the menu button down untill menu pops up, the use the up down left right and pushing of the joystick to select clock ans set it :)
0helpful
1answer

Clock Setting Kenwood KDC-232MR

Please refer to page 19 and 21 of the owner's manual. Let me know if you still need help!
0helpful
2answers

Kenwood kdc 7009 - just bought car w/ stereo in it, but no remote or codes ?

Look for a small hole in the face plate. Take the tip of a pen and try holding it in for a few seconds. Re-setting it should work.....
1helpful
1answer

Not Holding the Memory

Sounds like a wiring problem.

There is a YELLOW wire that should be connected to a constant +12 volt supply when the vehicle is off. This retains the settings.

Check the connections and see if thats the problem.



Please RATE my solution at the bottom.

Best of Luck.
Not finding what you are looking for?
Kenwood KDC-128 CD Player Logo

367 views

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

The Knight
The Knight

Level 3 Expert

76625 Answers

Cindy Wells

Level 3 Expert

6280 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...