There are 2 shafts that have the cutting blades on them and they both should turn. I have replaced many gears on this model and suspect that a gear is broken. Fellowes does not have many parts this model anymore. I would call a local shredder repair service or you can call Fellowes at 800-955-0959.
SOURCE: Fellowes DM8C shredder
What does the owners manusl tell you that the page limit is? Do not exceed it, and maybe just reduce it by one page at a time until you get the proper shred. Can not be sharpened. It would be cheaper to buy a new shredder.
I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de
SOURCE: Motor runs blades not turn
Sorry about that, there is no gears for that machnie. Have a great day!
SOURCE: shrededer motor remains on after shredding is complete
Blow out the sensors with some compressed air.(Computer Duster) they are likely covered in paper dust and the machine believes paper is present.
Please be sure to unplug the machine before attempting any sort of repairs
Hope this is of some help
Ed
SOURCE: durabrand shredder model wm6x runs in reverse but not forward
Try cleaning the sensors with a cotton swab and alcohol.
I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de
SOURCE: od700c shredder: motor spinds, blades don't move
Inside the motor assembly there are a series of nylon cogs , a large one of which interacts with a metal one. This is the most likely place you have one or two teeth missing from the large nylon cog that drives the shredder blades.
506 views
Usually answered in minutes!
×