My laptop (Toshiba A100) is having a problem.
It seems that It can't even load BIOS, but keeps showing "TBX error" on the top-left handside of the screen. I have found out it happens when the CMOS data becomes corrupt, but don't know how to fix it...
Please help me!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Take out battery from it, and re-insert it after 15 minutes or so. This must make it a hard reset. If it too doesn't help you, make sure there is a software corruption has been occurred. Re-install the O/S is the only solution. Electro help
Your cmos has become corrupted.
1. remove AC and battery power 2. press power ON for more than 30secs (around 1min is good). 3. release and attach battery/AC 4. power ON as normal This should clear the cmos on Toshiba laptops, it can be glitchy. If it doesn't you could possibly have a faulty cmos battery, or it may need to be reset manually which will require opening the laptop.
Usual cause for your error: memory error (data cannot be swapped out to disk using the paging file). To troubleshoot Stop error 0x00000050 1.Remove any newly installed hardware - usually the video driver does that 2.Run any system diagnostics supplied by your computer manufacturer, especially the memory check. 3.Restart your computer, and then run Chkdsk /f /r on the system partition. 4.Disable or uninstall any antivirus programs. 5.Disable BIOS memory options such as caching or shadowing.
I have found the soloution of this problem. Check your usb port .
Their is shortage in the USB port. You just check the usb port.
Definately their is usb port pins attached each other. Just open
their contact. and for more contact http://tinyurl.com/m7ghqz
press f8 during restart then choose last known good
if still can't load f8 again then safemode do a disk defrag and then restart
if you still get same error or cannot get on let me know so i can try another solution
don't forget to rate
1. Remove all USB devices such as printers, mp3 players etc etc.
2. Remove the power-cable and the battery
3. Press and hold the power button for 30 seconds
4. Put the power-cable back in but not the battery and none the USB devices.
5. Turn the computer on