Question about KitchenAid Food Mixers

1 Answer

I have a kitchen aid pro 6 kp 2671 the motor will not turn on.

Posted by richardsag on

  • richardsag Sep 10, 2013

    I have checked the power cord and it is supplying power to the control board and I do have power to the brushes?

×

Ad

1 Answer

Slo Mover

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • KitchenAid Expert
  • 185 Answers

Bad motor = $125.00
bad speed switch = $38.00
bad plug = $17.00

All are easy fixes in that model and all parts are available on the internet and ebay. A kitchenaid parts manual can be downloaded off of the internet and it is basically a tear down guide. Shoul be able to accomplish any of the three fixes in 15 to 60 minutes

Posted on Oct 16, 2013

Ad

3 Related Answers

Dan Hudson

  • 118 Answers

SOURCE: My Kitchen Aid mixer attachement rod won't spin when turned on.

It sounds likme you may have stripped/broken one of the gears up in the mixer head. Any competent appliance repair shop should be able to fix it.

Posted on Jan 27, 2009

Ad

SOURCE: Motor surges

http://downloads.mendingshed.com/KitchenAid_Service_Manual.pdf


See the section on repairs to speed control / motor.

Posted on May 27, 2009

Anonymous

  • 53 Answers

SOURCE: Kitchenaid 6 qt mixer repair

A small screwdriver or needle nose pliers will work to remove the cir-clips that hold on the shaft.

Posted on May 31, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does kitchenaide have different bowls for the Pro 600?


Kitchen Aid does have different bowls for several different models. You can also contact Kitchen Aid direct to get information about your model. Here is a link with information about your model mixer.

http://www.kitchenaid.com/shop/-%5BKP26M1XNP%5D-404905/KP26M1XNP/

Jul 21, 2014 | KitchenAid Food Mixers

1 Answer

Kitchenaid 600 pro


After many years dealing with Kitchen Aid mixers I purchased a pro 600 for my wife as an early Xmas gift. After just a few usages it started making a clunking noise in the gear housing. I removed the housing and discovered the casting is of very poor tolerances and the main drive assembly was lifting from the torque of the motor and causing the gear assembly to lift out of the casting and skipping on the worm gear. I am sure it is going to happen to many more of these units as the casting area that holds the bearing in is to large obviously an overdue mold in the casting process. Time for a recall Kitchen Aid.

Jan 31, 2014 | KitchenAid ProLine 600 Stand Mixer

1 Answer

Kitchen aid mixer 5kpm5 motor doesnt go round freely


Any appliance with a motor should rotate freely. These are basically gear driven devices, Kitchen Aid makes different quality equipment. So either the gears are worn or possibly if you notice an electrical smell the problem could be at the tail of the motor. there are 3 major components 1. the brushes where the armature spins if you look inside the vent holes you might see a slight arc while it is running 2. the tail piece which is how the motor is kept straight. or as I said worn gears. this is especially common when companies use plastic gears instead of metal ones. Commercial appliances made by people like Hobart are expensive, but they outlast most others..

Apr 09, 2013 | KitchenAid 5kpm5eer Pro-Line Heavy Duty...

1 Answer

Kitchen aid professional stops spinning


the pro series 600 has a worm gear, a worm follower gear, a bevel gear, and tree bearings the front rear and thrust bearings any of the above will cause the mixer to halt, to operate noisily, or grind, you need to open it up and look under the transmission cover. If it is an older model it could also be the transmission cover if it is a plastic one, My first thoughts is it is the worm follower gear. hope this helps you in the right direction.

Feb 16, 2013 | KitchenAid Kitchen Aid KP26M1X 6 Quart...

1 Answer

Kitchenaid mixer 600 won't turn on


bread is very tuff on mixers. always buy the strongest mixer that you can afford. im guessing the field in the motor fried.

Feb 07, 2013 | KitchenAid Kitchen Aid KP26M1X 6 Quart...

2 Answers

Kitchen aid mixer, voltage issue


i want to buy a kitchen aid

and i was wondering about the voltage since i'm in Qatar


and i found this answer , Hope its useful

http://www.110220volts.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=750-WATT&Category_Code=DownVoltageTransformer

Nov 10, 2008 | KitchenAid KITCHEN AID 5 Quart Artisan...

3 Answers

Kitchen aid 110v 450watt, I want to convert to 220v


Hi guys,

The only available Kitchen Aid stand mixers on the European markets are the Kitchen Aid Classic and the Kitchen Aid Artisan.

The best way is to contact a Kitchen Aid service center / repair facility in your area.
Here is the European website of Kitchen Aid: http://www.kitchenaid.eu/eu_EU/ka/ka_europe.htm

If you bought a different Kitchen Aid Stand Mixer (like the Professional series) you probably won't find the required parts to convert it to a European model. The only way would be to use a voltage converter.

I hope this helps.

Sep 24, 2008 | Food Mixers

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

225 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...