Veo mini capture camera software causes reboot

Hi skeeter2552,

I have looked into your problem and have found the following.
I managed to find the manual to your Webcam here:

http://www.amazon.com/Veo-Stingray-Web-camera-color/dp/B00006B9YB

According to the manual the Webcam originally came with a CD-ROM which had the drivers for Microsoft Windows 98, 98SE, Me, or 2000. It also had software called 'The Veo Stingray Suite' which enabled capture of still images and video etc.

If you can find the CD-ROM and you have a later version of Windows than the above, then it may be possible to use the Veo Stingray Suite in compatability mode, however I'm not sure if that will work.

As the drivers have installed and you had a message that the Camera was ready to use then this is a good start. As your camera is on a USB port then most up-to-date software should recognize it.

For example if you have Windows Movie Maker on windows 7, there is a webcam capture button for recording video. You will probably find that Software like Skype will also see it okay. Also you could look for Freeware for webcams but as always check for Viruses etc.

I hope this has been helpful.
Kind Regards
mparkyn

Hi, please get it here : www.freedownloadscenter.com/terms/veo-camera-drivers.../7.html
REgards, Jay

uninstall and reboot if xp sees it then reinstall software and drivers

uninstall and see if xp sees it then reinstall software

Normal 0 You need to go to the manufactures site and download the VISTA driver for the camera. Then follow the info below to install the program.



Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

i need my Veo Advanced Connect Webcam with Audio and i cant find it anywhere

Hi I think ya drivers will B at the link below.... www.driverfiles.net/Cameras/Veo/ Veo-Stingray-V002-Veo-Stingray-V002/ download/page,sh,1612,303,17,.html Ya may have to join, it's free & handy.

the problem lies with the driver of the cam particularly the capture execution file. removing the cam and uninstalling the driver from add/remove programmes, then reinstalling the driver software again should cure it and if possible use a different usb port if you have a spare.

We confirmed the following software and drivers compatibility with Windows 95, 98, and ME. Picture Navigator JLIP Video Capture JLIP Video Producer JLIP Video Player Card Navigator USB Drivers GV-PT2 Printer driver & Capture GV-DT1 Printer driver & Capture Video Navigator None of the above software will be compatible with Windows NT. At this time there are no drivers available to make these software programs compatible with Windows NT. There is an update available for the Picture Navigator software to work with Windows 2000 and XP in the Customer Support area of this site. (When executing the update be sure to have Picture Navigator closed). The following versions of software and drivers will work with Windows XP. Picture Navigator 2.1.5.1 JLIP Video Capture 3.1 JLIP Video Producer 2.0 JLIP Video Player 1.0 Card Navigator 1.0 USB Drivers Video Navigator

If after installing your camcorder in XP, the computer is Rebooting on its own, the you must get a Windows update. This is NOT a Samsung Issue. It is a known Microsoft issue with XP. Run a Windows Update and download the update marked: KB822603, USB 1.1 & 2.0 update. This will fix the issue of rebooting. Reinstallation of device drivers may be necessary.