Where can I find supplier of balance spring for Rusch HBS 250 band saw?

Not a motorcycle but might be

https://www.amazon.com/Rusch-HBSA-Operations-Parts-Manual/dp/B00RC631OC

Rusch HBSA A250 Band Saw Operations and Parts Manual Spiral bound 2014

I searched using https://www.google.com and only saw it for sale on Amazon.

https://www.amazon.com/Rusch-HBSA-Operations-Parts-Manual/dp/B00RC631OC



https://www.amazon.com/Rusch-HBSA-Operations-Parts-Manual/dp/B00RC631OC

Try to contact ereplacement . Or check out the motor from Baldor electric company. They have available motors. If you need band saw blade, my supplier is sawblade.com . Check them out.

I can't find good supplier for 9" band saw tire. Delta makes 9" saw, you might be able to find one with them , Ebay might be selling 9" tire too. I purchase my tires on bandsawparts.com . They have 6" and 8" diameter tires but it wouldn't fit for your saw.

You better ask help to someone who has knowledge about electric part of the band saws. Or you may call the manufacturer.

I think 59 1/2 inch blade will still fit on your bench top band saw. But try to give a call you supplier for assistance .

I have a 10" grizzly band saw and installed 10 inch tires on it. No problem with it's tightness. Most industry standard tires today are 6, 8, 10, 12 inches...so a 10 inch tire on a 10 inch metal band saw wheel should have no problem at all. The quality of the tires should be one of your top priorities. That's why I always go for a reputable supplier. Check it out: http://bandsawparts.com.

If nothing is loose, and the blade tension is high enough, you might want to hang a couple of pounds of wieght on a stiff spring on it. It will be trial and error, but I would start with about 3 lbs and a spring about like a screen door spring or stiffer. Where to hang it from is a guess too.

Skagen watches have a fairly unique band. If you have a leather band you can find a replacement from most after market band suppliers like Speidel. For the mesh steel the only after market I know of is from Bariloche. Bariloche. I am still not aware of any titanium mesh suppliers but you can always contact Skagen for replacement bands. They are very good at keeping replacement parts for their watches for several years.

http://www.skagen.com/service/orderWatchBandParts.fx

Once you have the band you will need to use a small screw driver to depress and release the spring bar that secures the band to the watch. Place a screw driver in between the ridge of the spring bar and the lug of the watch case and gently move inwards. Remember that the end of the spring bar is spring loaded so it may fly out if you move the end away from the watch.

Thanks!

http://dl.owneriq.net/2/25b2d6bf-98ca-40b7-9028-799685051d70.pdf