Question about Philips GoGear HDD6330 MP3 Player
I dont know why but the philips gogear has some kind of different usb port and i cant connect to my computer. please help me, i cant return it to the store and i would be wasting alot of money. please tell me what kind of usb port this is and how i can connect it
The gogear comes with a lead which has the charger one end, the other end it has a standard USB plug, in the middle of the lead is a connection plug which mates to the base of the gogear. If you do not have this charger lead try bidding for one on ebay. good look
The gogear comes with a lead which has the charger one end, the other end it has a standard USB plug, in the middle of the lead is a connection plug which mates to the base of the gogear.
If you do not have this charger lead try bidding for one on ebay.
Posted on Oct 10, 2007
The connection to your gogear will be smaller than the usb to your pc, it's the same with all peripherals, you should have been supplied a cable with it, standard usb one end and a thinner or squarer conection at the player, see below for examples http://www.directusbstore.com/cnb/shop/directusbstore?op=catalogue-products-null&prodCategoryID=55
Posted on Sep 13, 2007
Tips for a great answer:
Reset your GoGear with something sharp like the tip of a pen or the end of a paper clip,
if you're device isn't working properly or there's a frozen display.
Insert the sharp object into the "Reset" hole (located at the bottom of the player), and hold it there until the device turns off.
If resetting the device does nothing to restore the display, access the "Philips Device Manager" through your computer to recover the GoGear.
Click "Start" on your computer, then "Programs," "Philips Digital Audio Player," "Aria Device Manager," and then "Philips Device Manager."
This will launch the "Philips Device Manager." Make sure the GoGear is turned off completely. Connect your GoGear to your computer while holding down the "Volume Up" button.
Continue to hold the "Volume Up" button on your GoGear, until the "Philips Device Manager" recognizes the device and enters recovery mode.
Click the "Repair" button when it appears on your computer, then folow the steps to fully recover the GoGear.
Properly disconnect your GoGear from your computer and restart the device.
Recharge your device if your GoGear dies suddenly while playing.
Connect the GoGear to your computer via the supplied USB cord.
Plug one end of the USB cord into a functional, open USB port on your computer. Plug the free, smaller end of the USB cord firmly into the small USB jack on your GoGear and turn your computer on.
This will begin the charging process of your GoGear.
If recharging doesn't work, the battery may need to be replaced.
Check that your GoGear isn't in standby mode. Hold the "Power" button for two seconds to turn it back on.
hope this helps
Oct 07, 2012 | Philips GoGear ViBE SA1VBE08K MP3 Player
Dec 26, 2010 | Philips GoGear HDD6330 MP3 Player
Dec 25, 2010 | Philips GoGear Flash MP3 Player
Sep 14, 2010 | Philips GoGear HDD060 MP3 Player
Oct 14, 2009 | Philips GoGear SA3125/37 MP3 Player
Jan 15, 2009 | Philips GoGear SA5285/37 Digital Media...
Jan 19, 2008 | Philips GoGear HDD1830 MP3 Player
May 29, 2007 | Philips GoGear SA178 MP3 Player
Usually answered in minutes!