Need motor brushes for flowtron log splitter model ds26

Question edited for clarity.
Question moved from Cars and Trucks to a Log splitter category.

Not much on it, but there is a video of it being used. It is very slow and sounds like a dentist drill! Enough reason to get rid of it.

https://www.google.com/search?q=Flowtron+DS26+assembly+diagram

..

Question edited for clarity.
Question moved from Flowtron Garden, to Flay Control.

Not available anywhere. Contact them direct here in the link.

http://www.flowtron.com/mm5/merchant.mvc?Screen=PROD&Store_Code=F&Product_Code=FC7600&Category_Code=ElectronicFlyControl

https://www.google.com/search?q=flowtron+diplomat+fc-7600c+wiring+diagram

you will need to ask your local dealer .

3 things to check. : seals in the cylinder, seals in the valve body and pump pressure regulator.

I would look in the local phone book.

Your best chance for getting the diagram would be to contact the manufacturer. Refer to any literature that came with it.
I tried to find a support site, but to no avail. You might get lucky and find a repair facility that has one, but that would take some serious detective footwork.

I would recommend contacting the manufacturer. The warranty was 1 year. If you are at 13 -14 months, I would ask Flowtron for some help in getting it replaced. Sometimes manufacturers are willing to split the cost of a repair that is near the warrany end to help keep a customer satisfied. It is worth trying.
Good luck.

FLOWTRON OUTDOOR PRODUCTS
15 Highland Avenue
Malden, MA 02148
Telephone (781) 321-2300
Fax (781) 324-8403
Parts & Service: [email protected]
Sales: [email protected]

Simple Google search for Flowtron LE-900 manual, right on Flowtron.com site. For more help, just contact Flotron: http://www.flowtron.com/mm5/merchant.mvc?Screen=CU&Store_Code=F

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

First of all, I hate to, but have to ask, have you verified oil level is up to proper level? Have you checked power at directional solenoid when handle is moved to different directions, as well as released? Obviously when handle is in stop position, there shouldn't be power to motor in either direction. I can't see exact model, or design obviously,but that would be a good place to start.

For all swisher log splitter problems go to swisherinc.com.