Question about D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point

3 Answers

Dlink DWL-2100Ap i need the software for the installation of this access point

Posted by famox on

Ad

3 Answers

hassona1959

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Dlink DWL-2100Ap - 12_4_2012_6_19_20_pm.jpgDrivar

Posted on Dec 04, 2012

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi, Most routers/AP of this type don't really need/have an installation software. Their configuration is done thru a webinterface which opens in your browser. If you have connected your PC via a lan cable to the router, then configuration should relatively be easy. The most that you need to do is to verify that your PC is set to Auto Obtain IP Settings Automatically, or if you have a your own network adds, you must change it first to match the routers. Hope this be of some help/idea. Post back how things are or should you need further information. Good luck and kind regards.

Posted on Sep 14, 2007

  • Anonymous Sep 14, 2007

    If you need the manual or quick reference guide, it is available at the dlink website (dlink.com) http://www.dlink.com/products/support.as...

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi,

you not need software to install DWL-2100AP . just we need visit this website http//support.dlink.com and downlod quick installiton guide.pdf to DWL-2100AP

Posted on Feb 22, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer
0helpful
1answer

How to config

Try This:


1 connect your DWL2100 to your computer by cable and disable its wifi
2 reset your DWL2100 by holding the reset in for 5 seconds
2 set your computer ip address manually to 192.168.0.67 - (IMPORTANT)
3 open your browser and log into address 192.168.0.50
the DWL2100 wizard page should now open

I have also attached the manual just click on the link below.

Good Luck!

http://ftp.dlink.ru/pub/Wireless/DWL-2100AP/Description/DWL-2100AP_Manual_210.pdf
0helpful
1answer

How to reset to default system


copy and paste this link into your browser

ftp://ftp.dlink.ru/pub/Wireless/DWL-2100AP/Description/DWL-2100AP_Manual_210.pdf

it shows how to factory reset your access point on page 84
0helpful
1answer

Is there any limit for wireless D-link DWL-2100 AP ?

D-Link AirPlus Xtreme G DWL-2100AP Wireless Access Point provides speed upto 108Mbps, which is the maximum wireless signal rate derived from IEEE Standard 802.11g specifications. However, the actual speed depends upon the wireless network environment, setup and devices.

For further details please refer to DLink Official Product Description
0helpful
1answer
0helpful
1answer

I cant istall dlink dwl 2100 acess point.prescribed site is not opening

be sure to check every point on this TIP
to connect to "prescribed site" (I assume the default router IP address 192.168.0.1) you must be on same subnet and connect using a cable to router.
Consult Quick install Guide
or follow user manual Page !0 instructions:
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.
Open your web browser program such as Internet Explorer. Type the IP address of the DWL-2100AP in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-2100AP and your computer are in the same subnet.


If you need help in the matter let me know and I'll send you instructions
7helpful
3answers

D-link dwl-2100ap in WDS mode Received Deauth: WLAN 1 11G STA

I have had similar problems with DWL-2100 and (much less often) with DWL-3200. I have no solution, but a workaround: changing the authentication mode. For example, if the units are using WPA-Personal, I change it (on both) to WPA2-Personal or WPA-Auto-Personal. It doesn't seem to matter which mode is used, it's just the fact of changing it that helps (eventually). You may have to go through the process more than once. Also, realize that although the web interface comes up 30 seconds or so after a reboot, it may take another 30-60 seconds before a link is established, so don't give up too soon while trying these changes.
0helpful
1answer

DWL-2100AP

To use the DWL-2100AP as an access point (repeater), You have to set it up on the repeater mode and type in the MAC address of the router. The best way to do this is to run the AP manager from the cd.
Here is a link to the D-Link support page. Click on product manual from under the Support resources
http://www.dlink.com/products/?pid=292:

copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point Logo

Related Topics:

1,860 views

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Mike

Level 3 Expert

4377 Answers

k24674

Level 3 Expert

8092 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...