Question about Sony Mavica MVC-FD73 Digital Camera

1 Answer

Drive error I keep getting a drive error C:32:01. What can I do to fix this

Posted by Kadeeman on


1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

This is an early floppy drive model yes? Drive error could refer to corrupt floppy disc or a failure of the drive. Check the disc angle first - new disk formatted to camera. If it is not that - then buy another camera A repair I guess will not be an option -but checkout Sony first.

Posted on Sep 13, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My acre aspire 5517 keeps getting a disk read error occurred and I keeps repeating it over and over what do I do?

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty.
Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Apr 17, 2013 | Acer Aspire Computers & Internet

1 Answer

Hi have run a check lots of errors on the sata disk can i fix this myself

Basically you can fix most errors. A tech would run either the operating system disk utilities or run a specialized suite. Depending on the error this will normally fix everything. If the error continues or gets worse then the drive may have to be formatted or even replaced. Usually drive errors are fixable unless it is a actual hardware error.

The first thing to try is simply run windows error checking. When you open my computer and it shows the drives right click on the drive you want to fix and then left click on properties. This should bring up a new window. Look for the tools tab along the top. Click on that. Should be error checking at the top. then click check now. There are two tick boxes and both need to be checked for this to fix anything. Once they are click on the start button. This can take a few hours to run so you need to start it and leave it alone. You can't use the computer when doing this. If it asks you to reboot then do that and it will check the drive after it reboots but before windows controls the drive with all sorts of processes. When done it will come up with a window telling you what it did and what it fixed. If there are still errors or to double check re-run it. Past this point you need to use special disk error check software (usually $$$). These software programs usually fix most errors but take time but they also do not do anything to your data on the drive (documents, pictures, etc). If you take it to a shop about 99% of the time they will spend 5 minutes looking at then format it as that is the quickest sure way short of replacement to fix this issues. So if this looks like a possibility you need to save off all your stuff that you want to keep as it will be gone.

You can format a drive yourself quite easily but if it is your boot or C drive then you will need to re-install windows and all of your software before you can use the computer. So you would have to have all the software disks, serials numbers and the hardware drivers and so on all ready before you do this.

Start off with the error check and fix and that should get it

Nov 23, 2011 | Computers & Internet

1 Answer

Upon start-up, I keep getting an error message 0xc00000e9 "An unexpected I/O error has occurred". I do not have a drive and cannot seem to get to system restore. Help!

try booting to safe mode.
go to Start, my computer, and right click, select properties and then under tools, check disk for errors. Select automatically fix errors and it ask you if you want to schedule a scan when the computer restarts, say yes.

Reboot and let it fix it for you.

Dec 25, 2010 | Toshiba NB205-N210 Netbook

1 Answer

My dell inspiron 1720 keeps rebooting. Pressed

Yes. You'll need to replace the hard drive with that error code.

No matter you can't use that computer without replacing the hard drive.

If you have a warranty for the computer contact tech support for your dell, give them the error code you have
and they will immediately replace your hard drive.

Re seating the hard drive won't fix it.

Hope this helps!

Feb 21, 2010 | Dell Inspiron 1501 Notebook

1 Answer

I keep getting the E808 error from the Canon Imageclass MF6550. What does this mean, and what can I do to fix it?

E808 0000 Fixing drive circuit failure
- The heater does not turn on.
- A fixing drive motor failure was
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the fixing drive motor.
- Replace the DC controller PCB.
- Replace the power supply PCB

Dec 31, 2009 | Canon PC-940 Black and White Copier

2 Answers

A Disk read error occured PressCtrl+Alt+Del to restart.

If you are getting a disk read error, you will need to use a program like spinrite to fix it or you will need to replace the hard drive.
This is one error you don't want to see. It means your hard drive is failing.
You will not be able to do a system restore as long as you get this error.

Sep 22, 2009 | Computers & Internet

1 Answer

Red light blinking system error E74

this might be a hardware failure. try turning it off then back, or try keeping a fan on it when you play on and if that doesn't work call 1800myxbox there you'll find step by step instructions to send it down to texas and get it fixed. if that happens three times you will recieve a brand new xbox 360 that has that problem fixed. also keep in mind to keep your hard drive before you send it to be fixed. i really hope this helps with your problem
-good luck

Jul 14, 2009 | Microsoft Xbox 360 Console

1 Answer

Trying to reinstall printer and I keep getting an error message

Does this concern a hard drive, or a printer? disconnect the usb printer/scanner.

Get the most recent drivers and utilities for both the scanner and printer.

Keep me posted.

Oct 28, 2007 | Computers & Internet

Not finding what you are looking for?
Sony Mavica MVC-FD73 Digital Camera Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

6746 Answers


Level 3 Expert

8549 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides