Question about Kicker Solo-Baric L7 S15L72 Car Subwoofer

6 Answers

How to bypass video nav cd override

I would like to use without having to stop and put on parking brake

Posted by easyliving72 on

Ad

6 Answers

brandon day

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 173 Answers

Use a 3 prong switch witch has power acc and groung hook the parking brake wire to the power and ground the switch. mine u dont wait 3 to 5 seconds as soon as u switch it on its on

Posted on Sep 14, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Best this you can do is buy a two post toggle switch, get the wire is telling you to connect to the e-brake, connect that wire on one of the post on the switch, and the other ground it to ground (car frame, ground wire, etc)...then read manual on how long you have to wait to activate video ....and it will be the same with the switch as it would be the e-brake...i have one my self...i have to wait 3 to 5 seconds...then it activates...

Posted on Feb 12, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What I did is took the Parking or Brake wire and grounded it to the back of the radio. Works Great

Posted on Feb 10, 2008

Anonymous

Dumbass your supposed to hook the wire up to a toggle switch

Posted on Dec 20, 2007

Anonymous

It uses a ground signal on off then back onn so i used a toggle switch for that. Runa ground through the switch then to the unit and when you go to play movies flip the switch on then off then back on.

Posted on Sep 20, 2007

Timothy D

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 626 Answers

If its an aftermarket device, it has a sensor that is connected to the electronics of the vehicle to indicate that it is parked. Check the wiring, find the wire and move it to something that is always on, radio, a/c controls, etc. Best of Luck.

Posted on Sep 14, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i bypass parking brake wire? do i connect to negative or


what color is the wire from the radio it might be pink or purple with white strip. but the wire needs to see ground or parking brake wire

Mar 07, 2010 | Jensen VM9511TS AM/FM/CD/DVD/SD Player/7"...

1 Answer

2010 Ford Nav system (DVD player)


Ok, This simply requires that the "Park"Wire is either Earthed out, or Taken to +12 V. To be safe you should put a 1000 ohm resistor (This will limit any current to about 12mA, drawn, if wrong) in the line to stop any bad things happening, Tap on to the relevant, Eth, or Plus and see which one works.

Feb 16, 2010 | Car Audio & Video

2 Answers

Is there a way I can watch a DVD movie on my Pioneer AVIC-Z2 screen without having to put on my parking brake?


Yes, there is a way to watch a movie without the parking brake engaged. The parking brake safety mechanism is there for a reason, and I do not suggest that you disable this sytem so that you can watch movies while driving. With that said, the simplest way to bypass the parking brake system is to take the parking brake wire from the head unit, run a wire to a chassis ground point, and then put a toggle switch inline so that you can flip it on and off. This will simulate the engaging/disengaging of a parking brake.

Again, I do not condone or recommend watching movies while driving. There are enough distracted people driving on the roads.

May 18, 2009 | Pioneer AVIC-Z2 Car DVD Player

3 Answers

How do i bypass the parking brake switch in order for my video to play


To bypass the parking brake you should connect the parking brake wire from the unit to ground. It is better to do it via a switch because is illegal to watch video while you're driving. :)

May 15, 2008 | Car Audio & Video

2 Answers

Dual Parking Brake Code HELP!!


the esiest way to solve these problem is to make a switch connecting the blue/white with the brown cable it would work just find i had the same problem.

Mar 10, 2008 | Dual XDVD8181 Car Video Player

4 Answers

Bypass parking brake


Does the suggestion by djBass work with the avx800 too?

Feb 16, 2008 | JVC KW-AVX800 CD Player

4 Answers

Bypass the parking brake for vm9412 jensen


Hit Setup On Remote.
Select Language.
Get Remote And Hit 5,4,3,2,1,0.
Listen For Beeps. Touch “Hammer/Screwdriver” Logo.
Select Brake Override
Switch To Brake Override “ON”
Now Hit Setup On Remote.

this works thank you for posting this.
derek

Dec 25, 2007 | Jensen VM9510 Car DVD Player

6 Answers

Jensen in dash dvd monitors


jensen double din dvd monitor it a uv8020 model to bypass the e brake or parking brake

Dec 19, 2007 | Jensen VM9510 Car DVD Player

2 Answers

Bypass brake for a jensen vm9311


the wire is pink and say parking on the wire.

Nov 24, 2007 | Panasonic CQ-C3300U CD Player

3 Answers

Bypass


is there an override code I could put in instead of the toggle switch?

Sep 26, 2007 | Pioneer AVH-P4900 Car Video Player

Not finding what you are looking for?
Kicker Solo-Baric L7 S15L72 Car Subwoofer Logo

133 views

Ask a Question

Usually answered in minutes!

Top Kicker Car Audio & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Brad Brown

Level 3 Expert

18626 Answers

Are you a Kicker Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...