HP PSC 1510 series prints alignment test page every time it's turned on.

Cartridge calibration pending in your printer. Put printed align page in to scanner and scan it.. ensure that mono & color cartridge should be in good healthy condition..

replace all carts with new HP carts to get a sucessful alignment

may be you chaged the catridge.
It is not the test page it is alignment test page just put the printed alignment test page paper on scanner glass and press the scan button to complete the process. It is alignment process which is printer is doing for self testing after installing new cartridge. Just finish the process.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

For completing alignment both print cartridges need print in good quality.After the alignment page is printing put it on the scanner glass to way as shown on the page and press scan button.If not help replace the cartridges and try again.

yes, when you get test page face down the page on sccaner and press scan button after some time you get green light still, further u don't get test page again.

Hi,

I used to have the same problem with the 1510 and other HP models. The solution is not to have any paper in the tray when you turn it on. When the error flashes up, hold the cancel/resume button (it will be flashing orange on the printer) until all activity ceases in the printer. You can then cancel the message on the PC and load the paper when you are ready to print.

Pete

The only way to stop this is to press the cancel button, just as it tries to print the test page.

Various people have said the printer won't align (calibrate) successfully unless both ink cartridges are more than 50% full, and until it aligns successfully, it will continue to print the test page on start-up.

It is a total waste of ink and paper, so remember to hit the cancel button when you turn it on.

the photo come out pink and i buy yesterday can you help me hp 1510

first ckeck out the your cartages are ok and then when you start the printer them it print the alignment page then put it in the scanner and scan it your problem will be surually solved

Tdragon, Every time you install a new cartridge the printer wants to run an alignment page. If the alignment process is not completed it will print a page every time the printer is turned on. Your manual will describe how to do this procedure; if you don?t have one you can download it here: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&cc=us&docname=c00473778&dlc=en&product=428800&lang=en& Let us know if this helps and please don?t forget to rate this posting.