Sharp MX-4501n firmware - Sharp Mx-4501n Color Laser - Printer / Copier / Scanner

http://www.sharpusa.com/CustomerSupport/ProductDownloads.aspx?model=MX-4501N


Downloads Drivers Manuals SHARP Customer Support Electronics

Default password is 'admin, so try that.

Cheers

Check out my youtube video for cleaning the internals, it will probably help get rid of the lines on your Sharp copier.

How To Remove Lines from copies prints on Sharp copier

Network connection error.

Here is Service Manual for your Copier:

http://www.tradebit.com/filedetail.php/229896714-sharp-mx-3500n-4500n-mx-3501n-4501n-service-manual

Best Regards,

this is easy to do but it comes down to a security problem....cant be sure you are the owner of the copier best to contact local sharp repair

Try exploring the device's web management interface.
Use your wenb browser to connect to the device's IP address.
the default credentials for the unit are user: admin pasword: admin
if that does not work, try password: Sharp (note that the S is capital and the rest are lower case)

Pull the paper tray to the front, after it is stuck pull it up ward and front

You are using Bonjour to print to the MX-4501N which uses a generic post script driver. To fix this, you must install the printer using the proper driver from Sharp. For a first time install, download the drivers, install the drivers, restart, and install the printer as an IP printer, specify the IP address, it should be using the LDP (Line Direct Printing) protocol, and specify any additional optonal accessories you have on your MX-4501N. Hope this helps :)