Hi, have just got this phone, all charged, SIM and SD cards in. Open it and all I get is a white screen, there is no response to any buttons being pressed except holding down the power button. So the phone switchs off and I start again, everything works OK until the screen goes blank due to inactivity. It doesn't matter how many times i open or close it the menu screen refuses to appear!!! Whats wrong??? Help! TIA W
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is very simple to get Subsidy Code for Motorola KRZR K1 Phone....Visit the site Theunlockarena.com get Subsidy Code and unlock it easily.
Motorola KRZR K1 Unlocking InstructionsWarning :
Do not enter any wrong unlock codes on your Motorola KRZR K1 mobile
phones. If you enter over a certain amount of wrong unlock codes on your
Motorola KRZR K1 mobile phone, your phone may get hard locked and
sometimes become unusable.
1 - Switch ON your Motorola KRZR K1 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.
NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola KRZR K1 is locked to.
WARNING: If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody already entered too many wrong codes, you
just have to leave the Motorola KRZR K1 ON with the errors message and
after 40 minutes to 2 hours the message "Enter Code Special" will appear
There is a problem with motorola phones .Data cable between screen and main board use to brake by the flip top screens hindge.Hopefully it is not your problem,if it is then only in service they can fix it by replacing this cable.If it is a software problem then you can try to solve it by yourself.It may work if the software is faulty on the phone.Just follow the link below. http://motohell.com/
I believe you have a problem with the hinge of the flip where your wire that connects to the display opens up your screen. If you keep opening the flip and closing it slowly does the screen turn on and off??? If it does then you have a problem with the hinge like I said. If not then it could be just a software glitch where you need to reinstall the operating system.
If the phone still works, check to see if the left side of the hinge (when the phone is open and facing you) is loose. If you can wiggle the top 1/2 of the phone, the hinge is damaged, therefore damaging the flex cable that runs through it. If that is the case, replace the hinge assembly and the flex and you're good.
You have a option in the memory card settings to format. It will format, but still after loading some data into memory card the mobile starts freezing again, even im suffering with the same problem for a long time