I have a SOny flat screen Model# 27FS13. I jusat moved and when i took the tv out of the box and turned it on it has agreen screen. the middle of the screen seems to be ok. It' not connected to andVCRS or other equiment, other than the Direct tv DVR.
can this problem be fixed? Is so please tell me. My e-mail is [email protected]
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this sounds like 60hz or 120hz a/c ripple distortion. if taping tv corrects temporarily, ther must be poor solder on main a/c ripple filter. very large usually blue capacitor near power cord input on pcb. do not short positve and negative legs together as you could be shocked(even after tv is unplugged) and also cause more damage to tv. these filters can store electrical charges for days, even if unplugged the whole time. careful! mch
TRY A NEW HDMI CABLE 1ST. ALSO TRY ANOTHER INPUT. IF IT IS GREEN ON BOTH YOU HAVE A SOFTWEAR PROBLEM WITH THE UNIT AND WILL NEED TO CONTACT AUTHORIZED SERVICER TO SEE IF THE IS A SOFTWEAR UPGRADE OR TECHNICAL MENU ADJUSTMENT THAT CAN BE MADE.
If your friend is being honest, and why shouldnt he, and the set was knocked over, I'll bet there is now a small crack in the main board. Cracks in boards due to dropping or "knocking over" usually occur next to the flyback transformer or tuner. Cracks in boards are very easy to fix so if you do not have experience working inside TV's then allow a qualified tech to handle it for you.