HOW TO PROGRAM CP1660 - Motorola Walkie Talkie 2-Way Radio

To change the default program on your Hitachi SF-80P washing machine, follow these steps:

1. Press the "Power" button to turn on the washing machine.
2. Press the "Program" button until the desired wash program is displayed on the control panel.
3. Press the "Start/Pause" button to begin the wash cycle.
4. If you want to change the default program, press and hold the "Program" button until the control panel displays the default program screen.
5. Use the "Program" button to select the desired default program.
6. Press the "Start/Pause" button to set the default program.

Note: The default program is the wash cycle that the washing machine will automatically start when it is turned on. You can change the default program at any time by following these steps.

is this the error you are receiving?
thanks,
lee

Page 89 of the manual shows error codes.

http://manuals.repeater-builder.com/mo-files1/-CP%20Series/CP%20Series%20Basic%20service%20manual%206878421A01-A.pdf

Videos as well

https://www.google.com/search?q=Model+cp1660.+What+does+%27err+chan%27

..

It requires the radio programming program. You must take it to a dealer. It will cost a bit to be reprogrammed, call in advance.

Long press P3 and check key sign will be goes OFF, now your keypad is unlock.

Hi,

Have you removed the battery and left it out overnight ??

https://www.youtube.com/watch?v=5dJ-71jXF5o

Contact Motorola Solutions.

Get Support

Mark
Motorola Mobility Support

Need to reload software in pc. Dropping stuff. If you found this helpful, please post as so. If you need to knwo how, live chat