Question about InFocus ScreenPlay 4805 Multimedia Projector

1 Answer

Black and white

Recently when I have turned on my 4805 everything is in black and white. I ran a series of tests by changing the tuner that was attached as well as the rca video cable attached. I have had no luck. Help???

Posted by on

Ad

1 Answer

I'm afraid the color wheel is busted and no easy repair as it has to be replaced unless you can get the part and do it yourself which can be difficult, both to obtain the part and to replace it if you have no experience in open-heart surgery. Not really that difficult but if you are clumsy with your hands I suggest you leave it to the experts.

Posted on Dec 30, 2007

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My infocus 4805 only projects in black & White. NO MORE COLOR. How can i fix this?


http://home.comcast.net/~jexkids/Ebay/colorwheel/How_to_replace_Color_Wheel.htm

Here is the only solution.

Dec 17, 2010 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

I have no color everything is black and white


Try brand new cables, but it is likely the segments on your colorwheel have come off and will need to be replaced by a tech. If you tilt the unit from side to side you can probably here the pieces moving inside.

Nov 12, 2010 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

I'm installing a vanity light in the bathroom. The old one had a dimmer attached. For the new fixture, attached two white from the wall to the white in the fixture. attached two white from the wall to...


Get a test light, a bulb in a socket with a black and a white wire. disconnect both the black and the red. Also have access to the white or the ground. Then with the power hold the white test light wire to the white of the house and the black to the black. .turn the dimmer on and off and see if it controls the light. NEXT do the same with the red, that is test light black held to red and test light white held to house white. once again check the dimmer.

Typically when you have a hot red and a hot black in a fixture the black is on the dimmer and the red is always on because it is connected to an outlet built into the light. OR the light can be controlled from two locations, one regular switch and one dimmer switch.

Mar 01, 2010 | Electrical Supplies

1 Answer

My InFocus 4805 SP projector is showing just black and white


If you have any video at all and it's only Black and white there is a 99.99% chance that your Color Wheel has lost all of it's glass color filters.
You can confirm this by removing the lamp. then look straight into the projector where the lamp was and you should see the color wheel of colored glass segments (Red, Green and blue) I believe you won't see them because they came off of the wheel.
Also if you lift up the projector and turn it around in various angles and you will hear the small pieces of broken glass from the color wheel.
Unfortunately you will need to take it to an authorized service center for repair. Be prepared to spend upwards of $300 for the repair.

Cheers

Aug 23, 2009 | InFocus In Focus SP-LAMP-021 Replacement...

1 Answer

Nissan Murano monitor not showing in colour


Is there a setting on there where you can change the picture from color to black and white.

Jul 10, 2009 | 2005 Nissan Murano

1 Answer

Picture is black and white


Either the color wheel has thrown off all 6 of it's colored glass filters (most likely) and needs to be replaced. Or in the picture menu someone had turned the color all the way down (Less likely).


Good Luck!

SagerTronics

May 20, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Kenwood kdc-mp528 amp/speaker problem???


This is a common mistake. This problem indicates that you are using the solid blue wire from the head unit to the remote turn-on on the amp. This is a power antenna wire that only receives power when on FM radio. You need to replace this with the Blue & White wire from the head unit (power control wire) to your remote turn-on on your amp. This should solve your issue.

May 12, 2007 | Kenwood KDC-MP528 CD Player

2 Answers

Projector Problems


Sounds like the fuse popped. t5a=5 amps 250v=250 volts So you will need a fast-acting 5 amp 250 volt fuse

Mar 14, 2007 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
InFocus ScreenPlay 4805 Multimedia Projector Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

martin hogg

Level 2 Expert

157 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...