How to change text on the tax shift key for a Sharp XE-A202A cash register ?

To change the name of the tax on your Sharp XE-A202 cash register, you will need to follow these steps:

1. Press the "Menu" button on the register.
2. Use the arrow keys to navigate to "Program" and press the "Enter" button.
3. Use the arrow keys to navigate to "Tax" and press the "Enter" button.
4. Use the arrow keys to navigate to the tax rate you want to change, and press the "Enter" button.
5. Use the arrow keys to navigate to "Name" and press the "Enter" button.
6. Enter the new name for the tax rate (e.g., "Tax 23%") by using the number keys and then press the "Enter" button.
7. Press the "Menu" button to exit the program mode.

It's worth noting that the process for changing the name of the tax may vary depending on the specific model and firmware version of your Sharp XE-A202 cash register. If you are unsure about how to change the name of the tax or if you need further assistance, I would recommend consulting the user manual or contacting Sharp's customer support for further assistance.

Hi Lisa,
I think that you need to use the automatic tax.
I don't have an A505 to try but from the manual:download
link: http://www.cashregisterhelp.com/Sharp/sharpmanuals.html
best wishes,
Stratovator

That means there is a password that was set for the Z operation , Enter the password and press AMt button

Use 1 on all taxable and 0 on non-taxable buttons

Use 1 for taxable departments

The two main programs to edit are the tax rate program and the department program. have a look at these tables in the manual and set your tax.
If you need an XE-A41S manual, there is one here:
http://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A41S_programming_manual.html

You need to check the tables in the department programming section of the book. There will be a setting for tax or non tax for each tax number. So if you need to turn off tax 1, set tax 1 to non tax. See how you get on.
If you need a manual, C-tech have one here:http://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A402_operation_manual.html

9 => SBTL => Tax Number (1-4**) => @/TM => R => @/TM => Q => CA/AT/NS

"R": TAX RATE (0.0000% to 99.9999%) x10000
(Enter the rate in 6 digits. Leading Zeros may be ommited)

"Q": MINIMUM TAXABLE AMOUNT (0.01 to 99.99) x100
(Smallest amount for which tax must be collected)

**Up to 4 types of tax are programmable

Hope this helps!

Page 34 item 2 "Tax Programming for Automatic Tax Calculation Function" in the manual. You can download the PDF version of the manual by clicking the link below:

SHARP ELECTRONIC CASH REGISTER MANUAL XE-A404

There you go... :) Please rate me for this answer.

To change/program the tax rate, use the following procedure:

1. Turn key to Z/PGM position
2. Press 8
3. Press #/ST
4. Press A
5. Press #/ST
6. Press 2 (Auto Tax)
7. Press #/ST
8. Press 097500 (9.75%)
9. Press #/ST
10. Return key to normal mode

This procedure should program your tax rate at 9.75%

1. Press #/ST