I have a Roper top loading washing machine. The hot water won't shut off. The machine will go thru the cyles just fine but the hot water keeps running the whole time. Even after the machine has stopped the hot water is still running. What is wrong and what do I do to have it fixed?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That could be your lid switch. You should hear an audible click when you shut the lid. If the washer act like it is trying but won't spin that could be the drive coupler. I have a page which includes a service manual HERE
Good day, If you unplug the machine from the wall and the hot will still add water then it is a failed dual water valve, and must be replaced. Here is a tutorial on accessing the area where the valve is. It is not about changing the valve, but will get the job done.
clogged freezer drain in freezer. remove cover and work some hot water in and out of the drain with a turkey baster until water runs thru and then poutr more water thru drain until all ice is washed thru. good luck.
Check the lint filter at the end of the hose. The filter is actually inside the washer. My husband cleaned it out and now ours works great. Both hot and cold had stopped running in because of our hard water.