Blank screen changed a setting in the menu and now i have a blank screen

Try to restart the computer in safe mode. At start up press F8 key like your are trying to get the computers attention. You should get a start up menu. Chose Safe Mode. Once in safe mode reset the screen resolution to is lowest basic setting and reboot. See if this will help. Do you have a good antivirus program. While in safe mode run a scan also. Hope this helps Fixya up.

Hi and thank you for using fixya:
You said you see a blank menu screen. What are the options on the menu? what do you see exactly. While your console is on press down the power button for 30 seconds to restart to factory settings.
Good luck

hey right click on your desktop.go to properties.in the propertes menu go to screen saver tab.click on the screen saver tab.in the screen saver tab menu you will see a tab called power.click on the power tab.change your settings there for the monitor.let me know if it works.

Change the backlight settings in the Settings menu of the GoGear if the music continues to play when the screen goes dark.

Otherwise, if the music also goes off when the screen goes blank, run a Repair in the Philips Device Manager.

Press the menu button on the remote anc change the language setting. Blank screen, you may have to do a full channel scan (also in the menu screen) to search for channels. Lastly, make sure the correct input is selected to the input being viewed ( if the cable is connected to Input A on the bacl of the TV then you need to press the Input button on the remote to select input A (these TVs usually have like 5 different inputs to choose from).

Here are the MMS settings you will need to setup and/or verify:


From the standby screen, press the Menu Key.

Scroll to "Settings," press Select.

Scroll to "WebAccess," press Select.

Scroll to "Web Sessions," press Select.

Scroll to "Cingular MMS" press Menu.

Scroll to "Edit," press Select.

Validate the following parameters:
Name: Cingular MMS
Homepage: http://mmsc.cingular.com
Service Type 1: HTTP
Gateway IP: 66.209.11.32
Port 1: 9201
Domain 1: leave blank
Service Type 2: WAP
Gateway IP 2: 0.0.0.0
Port 2: 0
Domain 2: leave blank
DNS 1: 0.0.0.0
DNS 2: 0.0.0.0
Time out: 5 minutes
CSD no 1: leave blank
Username: 1: leave blank
Password 1: leave blank
Speed (Bps) 9600
Line Type 1: ISDN
CSD no 2: leave blank
User Name 2: leave blank
Password 2 leave blank
Speed (Bps) 2: 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
User Name: [email protected]
Password: CINGULAR1
Press Done.

Press Exit.

Press Back

Press Back.

Scroll to "Messaging," press Select.

Press the Menu key.

Scroll to "Inbox Setup," press Select.

Scroll to "MMS Message Setup," press Change.

Scroll to "Server Info," press Change.

Scroll to "MMS", press Menu key.

Scroll to and select "Edit".

Validate the following settings:
Service Name: MMS
Server Name: http://mmsc.cingular.com
Web Session Name: MMS

Please verify that your settings are as follows, and then you should be all set!

From the standby screen, press the Menu Key.

Scroll to "Settings," press Select.

Scroll to "WebAccess," press Select.

Scroll to "Web Sessions," press Select.

Scroll to "Cingular MMS" press Menu.

(if not there select "new")

Scroll to "Edit," press Select.

Validate the following parameters:
Name: Cingular MMS
Homepage: http://mmsc.cingular.com
Service Type 1: HTTP
Gateway IP: 66.209.11.32
Port 1: 9201
Domain 1: leave blank
Service Type 2: WAP
Gateway IP 2: 0.0.0.0
Port 2: 0
Domain 2: leave blank
DNS 1: 0.0.0.0
DNS 2: 0.0.0.0
Time out: 5 minutes
CSD no 1: leave blank
Username: 1: leave blank
Password 1: leave blank
Speed (Bps) 9600
Line Type 1: ISDN
CSD no 2: leave blank
User Name 2: leave blank
Password 2 leave blank
Speed (Bps) 2: 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
User Name: [email protected]
Password: CINGULAR1
Press Done.

Press Exit.

Press Back

Press Back.

Scroll to "Messaging," press Select.

Press the Menu key.

Scroll to "Inbox Setup," press Select.

Scroll to "MMS Message Setup," press Change.

Scroll to "Server Info," press Change.

Scroll to "MMS", press Menu key.

Scroll to and select "Edit".

Validate the following settings:
Service Name: MMS
Server Name: http://mmsc.cingular.com
Web Session Name: MMS

Hi there, just got that progresive problem gone :D
- Startup ur DVD (ON)
- Wait until Loading - No Disc (status on DVD display)
- In here, ur screen still blank (black screen)

And here's how:
- Press "Home Menu" button
on ur DVD (it should be on the down left of the circle button)
-- Watch out, the screen still in blank, just feel it right ok?

- Down 2x -- Initial Setting
- Menu / Ok (the circle button)

- Down -- Video Out
- Menu / Ok

- Down -- Component Out
- Menu / Ok

- Down -- It will choose Interlace, it will saved the day :-)
- Menu / Ok

That's it.. Cheers mate ^^
Give me a mail if u still have the problem, coz I Know how it sucks.
[email protected]

This is almost the same problem for me...Please provide a solution

If you have it hooked up to a cable box, then you should be abl to change the resolution setting through the cable box remote control, if not call your cable provider to access the menu that does the resolution settings