Question about Samsung Blackjack SGH-I607 Smartphone

1 Answer

Dropped in water and beer bucket

Opened the phone and dried it cleaned with Puretronix Contact Cleaner. dried it for 8 hours. display is ok. message is phone swiched off can only use side button to navigate Key board, power and rest of the buttons are not responding. very little sing on sound. any soultion is appriciated. Bad Luck is i bought it recently. Thanks krth

Posted by krth on

  • krth Sep 12, 2007

    Thanks Lee.
    Unfortunately I bought it from individual seller.

    Please let me know whether I can buy the circuit and replace it. infact is it worth doing that?

    Thanks for the quick response.

    Krth

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 42 Answers

The water has interfered with the circuit board in the back which controls the functions of the phone. You need to replace the phone. Since you bought it recently, i am assuming you have warranty so you should have no problems returning it. Good luck!

Posted on Sep 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was cleaning the screen with a cloth and now when I message people the letters are huge. I went into settings and put it on small. That didn't work. Any suggestions?


this is perhaps due to tiny amount of liquid from your cleaner contaminating the LCD screen. I guest you remove the battery, any extra cover and place the phone in bag of dry rice for 24 hours. By making the rice absorb the moisture when in contact, I am hoping the screen functions as normal. May not be a scientific method though

Mar 30, 2016 | Samsung Cell Phones

1 Answer

Steam in display unit - now only displays squares, no writing


not good you need to remove the display and dry it up and see if the contacts are clean and soldered do solder if its ok only clean it with contact cleaner for electronics

Mar 06, 2016 | Gaggia Titanium Espresso Machine

1 Answer

2001 mercedes s 600...i just aquired this vehicle 3 days prior..with SRS light on also CHECK ENGINE light on but it drove strong idled smooth..but car was faster 1st time driving it 2 months before...so on...


DRY OUT CAR. DISCONNECT BATTERY FOR 10 MINUTES THIS SHOULD CLEAR TEMPORARY CODES. CONNECT EVERTHING BACK UP AND RESTART. SEE IF NEW CODES OR HARD CODES RESET. GOOGLE TROUBLE CODES THAT REAPPEAR. I'M BETTING NOT MANY WILL REAPPEAR

Oct 07, 2013 | Mercedes-Benz S-Class Cars & Trucks

2 Answers

My message recieved time is displayed wrong


Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) 5 times - display should read "Time and Date"
4.- Press "SHOW" (top right arrow)- display should read "Hour:___"
5.- Press softkey "CHANGE"
6.- Enter hour - display should read "AM OK or Change"
7.- Select AM or PM
8.- Press "NEXT"(bottom right arrow) - display should read "Minutes:___"
9.- Press softkey "CHANGE"
10.- Enter minutes
11.- Press "NEXT"(bottom right arrow) - display should read "Year:___" 12.- Press softkey "CHANGE"
13.- Enter year
14.- Press "NEXT"(bottom right arrow) - display should read "Month:___"
15.- Press softkey "CHANGE"
16.- Enter month
17.- Press "NEXT" (bottom right arrow)- display should read "Day:___"
18.- Press softkey "CHANGE"
19.- Enter day
20.- Press "NEXT" (bottom right arrow)
21.- Press the Rls key
THANKS

Jun 21, 2010 | Nokia 7210

1 Answer

What does ##343 mean?


##345 is jammed cartridge error. Reasons could include:

-Foreign material or dried ink in head cleaning unit (also known as "purge unit") , or waste ink pump jammed up. Make sure waste ink pump rotates freely, after cleaning. Clean the waste pump-hose too! Waste ink pump is located under head cleaning system.

Symptons are:

-Grinding noise (very loud)
-Flashes error code ##345

Short fix:
1.Take apart and wash the ink clogged mechanical parts. Use hot water.
2. Reset waste ink counter


Long fix:
The following operation takes several hours / days to complete.

-Take apart the whole printer, so there is only a metal frame left, with couple of paper-rollers, and motors, and the "Print-head cleaning" -system. Wash this cleaning-system.

-Mark all wires that look the same (especially white flat ones), take photographs when disassembling.

In detail, remove at least following items:
-Main Power lead!
-Casing (Use bright flashlight to see TWO front cover-screws under the dark plastic!)
-Scanner (BEWARE of fragile flat-wires)
-Main electronic controller board
-Metal plate, plastic cover, and some others.
-Plastic base plate
-All materials that might absorb water. (two sponges, and one rubber foam part)

The two sponges are between metal frame and base plate, they absorb excess ink. Wash these separately, and dry, or change for new. (I left the shorter one out, when assembling)

There is also one long rubber foam part that is near where paper comes out, (visible from outside the printer, when cover is opened).

To get rid of the excess ink: Wash dirty parts heavily for 10 to 15 minutes with hot water. When out-coming water is clear, then it is clean.

-Let it to dry for couple of days, but you can use your imagination - compressed air could help it dry faster.

-Assemble it back together


How to reset waste ink counter (you should clean the printer also):

*AF-Key = Additional Functions key = the black button with the star in a head above it.

1) Enter SERVICE MODE. (Press AF-Key, followed by "scan", "copy", "scan" -Keys)
2) Select TEST MODE (press right arrow button 13 times).
3) Hit -OK-
4) Select [8] PRINTER TEST
5) Hit -OK-
6) It'll now say "- 8-2 +" press the right arrow key once to get "- 8-3 +"
7) Hit -OK-
8) Select 0. [INK COUNT].
9) Hit -OK-
10) It should return to showing the "8: Printer Test - 8-3 +"
11) Press the [Stop/Reset]key - (black key with triangle and circle on it) - (returning to the state of 4), and then press the [ON/OFF] key.


Cleaning the print head:

At any time, DO NOT wipe the actual print head with your fingers. Use ONLY water.

-Remove print head assembly from printer.
-Remove ink tanks.
-Use running warm water, wash away the excess ink that is dried around the print head.
-Take one disposable mug, fill with hot water, drop the print head assembly in there, and let it soak for an hour, or so.
(-IF you have massaging shower head, with spray jet -function, use this to deep clean the actual print head.)
-Dry it up carefully, do not wipe actual print head, just tap gently with soft paper.
-Install ink tanks, install assembly to printer, let it settle for some time (5-30 minutes)
-Run Nozzle check, cleaning, print head alignment.


This should do the trick.

Answer extracted from service manual and Techimo.

Good Luck,

-LL

Feb 23, 2010 | Canon SmartBase MP360 All-In-One InkJet...

1 Answer

Voicemail picks up too soon and New voice mail message always on


Check call waiting feature with mobile provider on number of rings to voice mail. Many problems repaired with booting phone (holding on/off button down till screen logo comes on & removing charged battery cleaning contact connections on phone and battery with DRY SYnthetic NOT cotton cloth ideally clean battery with alcohol swab let dry before returning to phone

Aug 07, 2009 | Vtech DS6111 Cordless Phone

1 Answer

Sprint LG Rumor - "8" on padkey not working (it's dried out now..)


remove its keypad and clean its contact surface (which is made up of rubber)with dry soft cloth and u r phone will b ok :)
please do care to rate my solution....thanks

May 30, 2009 | LG RUMOR Cellular Phone

1 Answer

Cleaning mixture


http://geeksquad.fixya.com/ThreadView.aspx?prdid=433384&thid=704416
Cleaning mixture
posted by wrangler4 on Jun 25, 2008
why is there nothing coming out of the machine?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Bissell 9400 ProHeat Upright Wet/Dry Vacuum. The problem is that you may have a bad switch or pump in the vacuum or a release valve could be stuck or broken. Please check your owner’s manual for the trouble shooting page to see what they suggest or contact your local vacuum cleaner dealer in your area or then contact the Bissell Factory cust serv line listed below: So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.bissell.com/ Customer Service 1-800-237-7691
Hours of Operation Monday thru Friday 8:00 am to 10:00 pm EST
Saturday 9:00 am to 8:00 pm EST Mail To: Headquarters, Bissell Homecare Inc
P.O. Box 3606 Grand Rapids. MI 49501
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 25, 2008 | Bissell 9400 ProHeat Upright Wet/Dry...

1 Answer

No cleaner or water will squirt out when I am shampooing. Yes, I have plenty of water, cleaner, power and set on floor cleaning bissell proheater 2X


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618960&thid=556844
No cleaner or water will
Posted by sherski3 on Apr 29, 2008
No cleaner or water will squirt out when I am shampooing. Yes, I have plenty of water, cleaner, power and set on floor cleaning Bissell proheater 2X

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Bissell 9500 ProHeat 2X Clean Shot Upright
This could be that you have a defective water valve assm below the water tank or the trigger assm is not working properly or not connected. You may want to refer to your owner’s manual and check out the trouble shooting guide for no water coming out. You may want to contact the factory or manufacturer to see if they have service tech support or to send out a new owners manual for your current model #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.bissell.com/ By Phone Customer Service:
(800) 237-7691 Hours:
M-F 8:00 a.m. - 10:00 p.m. ET
Saturday 9:00 a.m. - 8:00 p.m. ET

Don – The Vac Man
Go Ahead. Use Us.

Apr 29, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...

Not finding what you are looking for?
Samsung Blackjack SGH-I607 Smartphone Logo

Related Topics:

54 views

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Jean Thiebaux

Level 2 Expert

162 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

aliasger yq

Level 2 Expert

219 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...