Question about Canon imageRUNNER C6800 Copier
Error code E007 on an ir2016 means that the fuser film has a fault. The fuser film is the black sheet that melts the ink into the paper on the final stage of the copy process. It more than likely has ripped apart. You will need to call a service tech for this one.
Posted on Dec 18, 2009
SOURCE: my canon IR 3100 CN
The main thermistor (TH1) has an open circuit or has poor contact. The sub thermistor (TH2) has an open circuit or
has poor contact. The thermal switch (TGP1) has an open circuit. The main heater (H1)/sub heater (H2) has an open
circuit. The AC driver PCB is faulty. The DC controller PCB is faulty.
E004 0001 protection circuit error of the fixing unit
Description: A short-circuit is detected in the triac (for 1 sec or more continuously) while the heater remains off (hardware detection) for 40 msec continuously.
Remedy: Turn off and then on the main power supply.
Remarks: fixing assembly triac malfunction/13V power supply error
Posted on Feb 12, 2011
Tips for a great answer:
Jun 23, 2016 | Canon Office Equipment & Supplies
Feb 27, 2016 | Canon Office Equipment & Supplies
May 05, 2012 | Canon Office Equipment & Supplies
Mar 28, 2011 | Canon imageRUNNER C6800 Copier
Feb 02, 2010 | Canon IMAGERUNNER 6570 Copier
Jan 16, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Sep 06, 2009 | Canon Digital Copier/Printer
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: