I've refilled Kyocera FS- 1135 mfp then not genuine toner had detected.. but the toner i used is kyocera compatible toner and its working to other kyocera machines.. Is it because of the IC chips or what? What is the possible solution for this. Thanks..

SOURCE: Hi, moved my FS 3830 and it now says check waste

If you are in Ho Chi Minh City,you can go to Dinh Cao Trading and Service Company at 63 Vinh Vien street district 10 and we'll solve the problem for you.

Testimonial: "We took machine there this morning. Will lwt you know how it goes..."

SOURCE: I have a FS-1118 MFP

yyou have to be careful when doing this.
the waste toner is built in to the process unit (drum unit) and has a plug on the side.
remove the plug and tip it out.

SOURCE: kyocera FS-1016MFP "printer error service

Code: 6000
Contents: Broken heater lamp error
The temperature won't rise by 1°C/33.8
°F during warming up and the heater is
turned on for 5 seconds.
The temperature won't rise by 1°C/33.8
°F during printing and the heater is
turned on for 5 seconds with the duty
cycle more than 60%.

Causes:
- Defective fuser thermistor.
- Broken thermal cutout or heater lamp.
- Defective engine/high voltage PWB.