Brother MFC-210 user guide

They don't tell lies :>) Even the smallest piece of paper over the sensor will record a jam. This often happens when you have a jam and you pull the paper and it tears a piece off. Open all the doors, remove the paper tray, remove all the toner or cartridges and look with a flashlight. Always pull paper jam paper in the direction it was going, undo tensioner clips if present and pull paper evenly and slowly as not to tear the paper. If you do, keep the paper and find the piece that fits the piece that is missing.

Having said that, see the link

Paper Jam Problems - Epson XP-430 User Manual [Page 234]

https://www.manualslib.com > ... > Epson Manuals > Printer > XP-430 > User manual
Epson XP-430 Manual Online: Paper Jam Problems. If you have problems with paper jams, try these solutions: 1. Cancel the print job from your computer, if...

SOLVED: Error says paper jam, but there is not. What could cause this ...

https://www.ifixit.com/.../Error+says+paper+jam%2C+but+there+is+not.+What+could... Dec 18, 2013 - I have an Epson Artisan 837 all in one. It was working perfectly fine yesterday. Today it is telling me I have a paper jam. I went through the steps ...

How to solve paper jam or paper feed error DO IT YOURSELF ...

? 3:43
https://www.youtube.com/watch?v=kHHpVcSJvvA
Aug 16, 2016 - Uploaded by Easyprint-DZ Support
... of commons problem of printer . paper feed error or paper jam error. ... we gonna work on epson ...

Paper Does Not Feed Correctly - Epson

https://files.support.epson.com/htmldocs/pho22_/pho22_rf/trble_4.htm Paper does not feed. Multiple pages feed. The paper jams. Paper is not ejected fully or is wrinkled. Paper does not feed correctly when using the double-sided ...

Epson XP-430 ' XP Series ' All-In-Ones ' Printers ' Support ' Epson US

https://epson.com/faq/SPT_C11CE59201~faq-293729 Mar 24, 2016 - If paper jams when you load only one or two sheets, try loading more sheets at a time. Do not load more than the recommended number of ...
Epson xp430 paper jam Google Search

Hi my reply was too long heres the second half..and ill retype the first as a comment

Try printing lighter prints, heavy toner saturation causes paper to stick to fusers and try to keep leading edge of print blank with no big blobs of colour for the same reason, ensure page sizes are set correctly in driver and machine tray settings and dont print outside margins , if you are about to print outside margins your printer driver should warn you, dont click ok if it does

Here is your user manual for your oki. and a link to oki print drivers to suit 610

Here is a link to Magic touch Australia that i thought has some good info re transfer paper use

Ensure your printer works ok with plain paper so we know it aint a printer fault but I'd say it due to how we are feeding the paper and how we have the paper type set and not feeding out the rear as I also think we should be.

Oki does the best colour prints nice and glossy, I dont think many come close to such great colour prints in fact I only like Oki and Kyocera stuff in Colour toner laser machines. Stear clear of cheap non oki toners and supplies because they cause heaps of issues and wreck printers and give many print quality issues, I dont work for OKI directly just telling you how it is in the field ;)

Let me know if you need more help and how you go

Cheers
Steve

How to clear and avoid paper jams: To clear the paper path: 1 Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer, lift the scanner unit to open the printer. 2 Pull the paper out. 3 Close the scanner unit. 4 Press check. 5 Reprint any missing pages. To avoid paper jams, do not force paper into the printer.
The Lexmark X7500 Series User's Guide will be able to give you more detailed instructions on how to troubleshoot paper jams and misfeeds on your printer. You can download the user's guide from the Lexmark website at http://bit.ly/mdAcJO and go to page 177.

Here is a link on how to clear all the paper jams that can happen on your HP printer. Also, here is another link on how to clear the paper feed rollers on your printer.

And here is the User Guide for HP Photosmart 3110 for any reference.

Have you tried cleaning the paper pickup and registration rollers? See page 128 in the HL-2700CN User Guide available from the Brother Solutions Center

Hello,

I hope this will be of Help for the HP LaserJet 1300 Paper Jam Trouble Shooting:

1. See the product user guide for information about clearing jams from the printer.
2. Make sure that the paper guides are adjusted properly. Slide the guides against the sides of the stack in the main input tray or the priority input tray to center the page. Make sure that the guides are not adjusted too tightly.
3. The media input tray might be too full. Remove some of the sheets.
4. Make sure that the media being used meets specifications. Click here to refer to "Media specifications" for more information .
5. Make sure that the media being used is not wrinkled, folded, or damaged.
6. Make sure that the printer is clean. See the product user guide for information about cleaning the printer.
7. If printing to the straight-through output path, close and open the door again to make sure that the green release levers are closed.
8. The paper might not have been removed from the main input tray before the tray was refilled. Always remove paper form the main input tray before refilling it.
9. Output capacity might have been exceeded in the paper output bin. Do not allow more than 125 sheets of 20-lb (75 g/m2) bond weight paper to fill the paper output bin (less for heavier paper).
10. The pickup roller or printer separation pad might be dirty or damaged. Clean or replace the part. (See the product user guide for information about cleaning and replacing the pickup roller and printer separation pad.)

http://www.devicemanuals.com/guide/Printers/Brother/Brother-HL-2030-Laser-Printer-User-Manual-T0RFME56VT.html

This is the link to download the Owner Manual and User Guide, but if you don't need it, then here's the link direct to their email contact page. You can enter what's wrong and they should get back to you soon.

http://www.brother.ca/en/customer_care/online_support.asp

Hope this helps

You might have a bit of paper stuck deep inside the printer. Read your printer's user guide manual. for how to remove paper that is jammed inside the printer. If you haven't got your printer's user guide manual, then just download a pdf version from your printer manufacturer's website.

There is a section in the user guide that shows how to remove and avoid paper jams on this unit:
Click on the user guide link .
http://www.generalmanual.com/Printers/Dell-1110-Laser-Printer.htm

Printer paper jams can be caused from:

Paper that is sticking to-gether - fan your paper from both ends and both surfaces before placing it into the printer

Paper tends to absorb moisture in high humidity - this can also cause it to stick and jam.

Always store your paper flat - many printers jam readily when supplied with bent or slightly damaged paper.

There could be a piece of paper stuck in the printer from a previous jam - especially if you have printed labels - it only takes one tiny corner of a label to cause paper jams in any printer - cheap consumer models to commercial models costing thousands of dollars.

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Look for a "jam door" at the rear of your printer (if so equipped).

You will need : 1 can of "compressed air", 1 container of ether rubbing alcohol or some form of Goo-Gone.

1. In short blasts (NOT LONG ONES) blow through the paper path. Open any paper jam access trays before doing this so the bits escape.

2. Using a SMALL amount of Goo-Gone and either a Q-Tip or small dust free cloth, clean all the rubber rollers on the bars. Cheap paper leaves a fine dust and after time will make the wheels very slick.

Doing this every other month can save you from jams and is just a good maintenance plan for your printer.

Also don't use 'cheap paper'.

Good luck! :)