Question about Televison & Video

1 Answer

MItsubishi VS-4506R projection TV multiple b/w ghost images to the right

Have this model and have noticed that on warm up, the picture will have a series of ghost images off to the right of the first image that subsequently fade out after about the 5th generation... This problem used to go away after warm up but is steadily getting worse and now never goes away. I will try to describe the problem another way. If I had a white screen with a vertical black line in the middle, I would see 4 or 5 more grey ghost type images (lighter and lighter) off to the right. (almost like an infinity mirror effect) This problem is present using any of the inputs. Thanks in advance

Posted by on

  • 1 more comment 
  • Donald Bailey Sep 13, 2007

    I just wanted to say thank you for your help. Getting to the Cap was a major pain but after changing it out, the picture looks better than it ever has. (we bought it used).

    Electrolitic cap to fix Tv.... $1.29
    My wife now thinks Im a hero... Priceless.

    Thanks again,
    Don

  • Anonymous Dec 10, 2008

    Shadows appear on left side of screen. Samsung model # HLR7178WX/XAA You mentioned an Electolitic cap ($1.29) fixed the problem! I need the part # , where it goes and how to install it.

    Thanx. Joe.

  • Anonymous Mar 31, 2009

    sdf

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

JAIL BARS IN PICTURE, CHECK C2B1 100 UFD 16V OFF PIN 2 IC202 ON THE MAIN PCB. If this does not help let me know.

Posted on Sep 11, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My zenith sentry tv has a double image on the words that come on screen. The people are clear but all wording has double images


Hello
Double images are technically called Ghosts, occures due to the setting and direction on the antena. You have to reorient your antena, in such a way that Ghosts disappeares from your screen. The reson for this fault is not with the TV, as it gets a direct transmission signal, and a reflected signal of the same, reflected from near or far objects, like tall buldings, hills and so on. The signals, the orginal and the reflected, will be processed by the TVs internal ciiruit, and the first will appear as strong picture, followed by the second, a weak picture, will be seemed as an image of the first one, just on the right side [view point] of your TV.
You just adjust the position and height of your antena, looking the picture, where there is minimum Ghost level is. No other repair should be done to your TV, as it is perfect, and you just give it only direct signal path. OK.

Nov 22, 2010 | ZenithZ2541S 25" TV

1 Answer

Image ghosting only on magenta


If the ghost is only on the magenta, your imaging unit is to blam.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Oct 08, 2009 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Background ghost like images


CHECK IT IN THE DIFFERENT ASPECT MODES. IF THE IMAGE STAYS IN THE SAME PLACE REGARDLESS OF ASPECT. THEN YOU HAVE A LCD PANEL PROBLEM. PANEL WILL HAVE TO BE REPLACED.

Feb 27, 2009 | Televison & Video

1 Answer

Blue Ghost


you will need to replace 2 stk ic [ parts ] after that the technician will have to realign the picture, sometime also some resistors get bad along with one or 2 fuses

Dec 15, 2008 | Sony KP-51HW40 51" Rear Projection...

2 Answers

Shadowing


GOOD DAY ND GOOD LUCK;

TRY THIS, IT WILL CORRECT CONCERN:

50V500 ONLY
GHOST: May be described as "Out of Convergence" but ghost is still attached to main image.
CONDITION:
A "ghost image" appearing to the left or right of images in the picture. Can be varying shades of a primary color (red, green, or blue) as well as gray. Can easily be seen in the 4 x 3 mode, at the edges of the picture.
CORRECTION:

To correct the problem, please do as follows:
  1. Access I2C Menu. (See page 57 of the Service Manual).
  1. To enter the I2C Service Menu, with power off, (on the front control panel) press and hold the INPUT button. Then press the POWER button for two seconds. The following Service Menu will appear.
03b_ghost_image01.gif Figure 1
  1. BEFORE CONTINUING: CONFIRM THAT THE R, G and B DRIVE ARE SET AT 40.
  • Be sure to press SELECT after each change to SAVE the new Data.


  1. Using the Remote Control joy stick, scroll down to next page (see Figure 2) until LCD ADJUST is highlighted.
03b_ghost_image02.gif Figure 2
  1. Move the joy stick to the right to cursor right once. The next page will appear with the word GHOST highlighted.
  2. Cursor right again, and a white screen will appear with a BLACK SQUARE in the center, as in Figure 3. You will see LCD ADJUST, followed by “SHP” and a number (value).
03b_ghost_image03.gif
Figure 3

  1. If the unit is out of adjustment, you will see a gray ghost on either side of the black square. Move the joystick to the right or to the left until the ghost disappears. The number values will change up or down.
    • If the ghost adjustment is off with a lower value, there will be a ghost to the left of the square.
    • If the ghost adjustment is off with a higher value, there will be a ghost to the right of the square.
  2. Once you get the square to look good without ghosts, press "SELECT" to save any data values that have been changed.
  3. Press the "EXIT" button three times to return to normal picture.
  4. Adjustment is completed
  5. I HOPE THIS WAS HELPFUL, big IRISH.




Jul 26, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Hit 53UWX10BA


convergance ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 14, 2007 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Ghosting


Get firmware upgraded.

Oct 30, 2007 | NEC VT465 Multimedia Projector

1 Answer

Hit 53UWX10BA


Check you cable box compared to another tv.  The pisture may need adjusting take off front panle and use the screws to adjust pic  it could get better of worst be carefull

Oct 21, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

Level 3 Expert

6074 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...