Brother MFC 9600 All-In-One Laser Printer Logo

Question about Brother MFC 9600 All-In-One Laser Printer

3 Answers

Need User Manual for Brother MFC 9600 All In One

I need to set up a Vrother MFC 9600 All In One, and I don't have the User Manual, any know where I can look up for Manual or Download it ? Regards

Posted by Totosmith on

  • Anonymous May 20, 2008

    my printer doesn't work:
    1. after scanner was used,
    2. also showed "hex dump mode" could not be changed when I tried to reset.
    3. which port i should use to connected with IBM lap top. IPT1? LPTt2? LPT 3? or Com1?com2? com3?


  • bfuller Sep 19, 2008

    My machine is in the Hex Dump Mode and I can't find anything on it in my manual.

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How do i remove the ex dump mode

Posted on Jul 15, 2010

Ad

Arun Arya

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a brother MFC 9840 CDW. The control panel is showing a message hex dump mode. How do I get out of this mode?

Posted on Jul 20, 2009

  • tmainfam Jan 09, 2011

    I have MFC8300; here's the solution. Press on/offline. then Shift and Test/Reset at same time. Voila! hex dump mode gone!

×

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Here's the link; http://www.amazon.com/Brother-MFC9600-Flatbed-Laser-Multifunction/dp/B00004U4A0 Under "product details". Hope this helps :)

Posted on Sep 11, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Change baud rate on brother fax machine

Lowering the Baud rate on Brother fax machines.
  • Press the Menu or Menu/Set key. Then Fax, Miscellaneous and Compatibility.
  • Press the Up or Down key until you can select Basic. Basic reduces the modem speed to 9600 bps.
  • Press OK or Menu/Set or Set key.
  • Press Stop/Exit.
Note these instructions should work for the following models: Fax-1835C, Fax-1840C, Fax-1940CN, Fax-2440C, Fax-2820, Fax-2825, Fax-2920, MFC-210C, MFC-215C, MFC-240C, MFC-3240C, MFC-3340c, and most other MFC models.

http://www.voipmechanic.com/voip-fax-settings-9600-baud.htm
0helpful
1answer

Change baud rate for brother fax

http://www.voipmechanic.com/voip-fax-settings-9600-baud.htm

Lowering the Baud rate on Brother fax machines.
  • Press the Menu or Menu/Set key. Then Fax, Miscellaneous and Compatibility.
  • Press the Up or Down key until you can select Basic. Basic reduces the modem speed to 9600 bps.
  • Press OK or Menu/Set or Set key.
  • Press Stop/Exit.
Note these instructions should work for the following models: Fax-1835C, Fax-1840C, Fax-1940CN, Fax-2440C, Fax-2820, Fax-2825, Fax-2920, MFC-210C, MFC-215C, MFC-240C, MFC-3240C, MFC-3340c, and most other MFC models.
0helpful
1answer

The fax on my brother MFC-8460N does not work. it does not pick up a dialing tone when sending and on receiving it rings once says receiving bit nothing comes through. Please help

Your modem setting probably is not compabile with the data rate your phone will support.

From the user manual --

If you are having difficulty sending or
receiving a fax due to possible interference
on the phone line, we recommend that you
adjust the compatibility setting to reduce the
modem speed for fax operation

Press a or b to choose Basic or
Normal (or High).
Basic cuts the modem speed to
9600 bps. Unless interference is a
recurring problem on your phone
line, you may prefer to use it only
when needed.
Normal sets the modem speed at
14400 bps.
High sets the modem speed at
33600 bps.
Press OK.
Press Stop/Exit.

The other thing to consider is do you have tone or pulse dial service from your telephone company?
0helpful
1answer

Where can i get a user manuels for a old printer brother mfc3100c? sincerly your, michelle

Here are the links:
Brother MFC 3100c User Manual
Brother MFC 3100c Quick Setup Guide
Brother MFC 3100c Windows XP setup guide

The documents will open up in your browser or you would be asked to "Save" or "Open". Let me know if you need further help.

Good Luck.

Thanks for using FixYa.
0helpful
1answer

Ned user manual for brother mfc 210

Hi


To copy a page in Brother MFC210 you need to press copy button on your printer, load your document and press black copy (to copy in BW) or color copy. You can also select number of copies by pressing keys 1 to 99 before pressing black copy or color copy button.

For your user manual you can visit this link---

Brother MFC 210 User Manual


Daniel Scott
0helpful
1answer

Brother MFC 9600 won't pull paper from tray

There are rollers that cling on to the paper and move it through the machine. When the rollers are worn down they do not grip the paper. For a short fix you can get something rough like sandpaper, brillo pad, etc, and gently scratch the rollers to give them some traction. This will temporarily solve your problem until you can get the rollers replaced.
0helpful
1answer

How do you change the transmitting speed from 14,400 to 9600 ?

Fax machines are ANALOG devices, your fax will not work reliably on a DIGITAL phone line. There are no analog packets.
1helpful
1answer

Manual

Hi - You can download the manual from the link underlined in blue below:

MFC 9600

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica
5helpful
1answer

How to clear a Machine Error 76

Error 76 is fuser error, you need to change the fuser but first just in case try to reset settings to factory defaults.
Not finding what you are looking for?

2,097 views

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6470 Answers

Gary
Gary

Level 2 Expert

301 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...