Cnet 5 port blinking lights - Cnet Computers & Internet

LG TV : Picture not coming on screen, but TV is on. - Forums - CNET

www.cnet.com > Forums > LG

CNETJul 14, 2014 - Dear All, Have a peculiar problem with my LG flat screen TV. It stopped working suddenly, that is no picture when switched on, I noticed the ... However, in my case the RED light keeps on blinking and there is a ticking sound ... LG Plasma Flat Panel 42PC3D - No picture just sound
Jun 11, 2015
No Picture from LG 50PS60 Plasma TV
Nov 16, 2013
More results from www.cnet.com

LG LCD TV REPAIR - NO PICTURE SCREEN FIX REVIEW ...

? 5:29
www.youtube.com/watch?v=PWoz_-3OHIM
Jan 25, 2013 - Uploaded by Tampatec Common LG LCD TV REPAIR - NO PICTURE OR BLACK SCREEN FIX ... came on good with green light working properlybut still no picture.

No manual. Maybe a pinhole reset switch?

Typically, printers will blink a yellow light to indicate a communication problem between the printer and the computer.

1. Shut your printer and computer completely down.
2. Check connections to printer
3. Follow connected printer cables to the related computer port.
4. Check connections to computer
5. Turn the computer on and let it boot up
6. Turn your printer on.

The power light should stay solid as long as the router is plugged in. The WAN light and LAN lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

The all lights will starts blinking everytime the switch is powered ON.
This is normal process as the switch is checking the status of all its ports during startup.

Please wait for 5-10 minutes this activity will completed and the port lights will not blink if nothing is connected.

If it still blinks without anything connected to the ports then you need to ask the vendor for a replacement.

interConnecting two switches will need a crossover cable. Please use a crossover cable.

This particular 8-port Ethernet switch/hub has auto-negotiation on both speed as well as MDI, MDI-X.  Therefore, the problem is not with your switch/hub, it's probably with the particular port that you're connecting it to on your Router.  Make sure that it's the LAN side, not the WAN side.

hello!


you may try this and see if this help solve your problem

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear
stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and test the Internet connection.

if this still didnot work, maybe you need to upgrade the firmware of your router