An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: about laser printer
You can find information on the following link:
Please update the question & let us know if the information given was useful to you - Good Luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A beam detection error usually means that the laser scanner that writes the information onto the drum of the printer has failed. Check all connections first, if they are ok then the laser will need to be replaced. Please note that the laser is virtually invisible and cause eye damage so do not operate the printer with the laser assembly open.
Turn off the printer,wait 10 minutes,than turn it on. If not good yet,open the top of the printer.Look for small shooter that holds the laser.Open,and force the laser out into the center of tracking craddle.After you move the laser,unplug the printer for few minutes.Then plug it back in.
The drum is the component that actually transfers the image onto the page.
Laser Printing 101. When a page is printed to a laser printer it is transferred to the laser printer via the network or usb cable using the driver installed on the PC. This information is then converted back into a format the printer can print through the Format board and the internal firmware of the Printer. This information is then transferred to the drum via a laser beam to a photo-sensitive film on the surface of the drum which is charged and allows the toner from the toner cartridge to stick to the drum which is then transferred to the page and the page is then fed through a Fuser (A heated roller which operates somewhere around the 300-500 degree cetigrade point) to fuse/melt the toner onto the paper which is then fed out to the paper cachment area you collect your printout from.
Hi! Good day! The information you will need will the wireless network name and the wireless password. If you already happen to know those information, just get to the wireless connection set up of your laser printer and input the information. Make sure there are also computers that are currently connected to the wireless network.
Laser scanner unit error.
Turn off the printer, and then turn it on again. If the same error occurs, turn off the printer, then contact the store you purchased the printer, or a service representative. When contacting the service representative, inform them of the error code displayed and symptoms.
Error Code: E100 0000
try Printer Test page The Printer Test page contains information about printer driver and port settings. The page also contains information about the printer name and model, computer name, and so on. You can print the Printer Test page from the printer driver. is it on the network? login to the printer using http://<ipaddress of printer> other option is to contact hp support online.