Star 39 JetStar Popcorn Maker Logo

Related Topics:

Question about Star 39 JetStar Popcorn Maker

1 Answer

Wiring diagram kettle - Star 39 JetStar Popcorn Maker

Posted by Anonymous on

Ad

1 Answer

Marks concession repair

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 76 Answers

The wiring good the kettle is pretty simple. Black goes to x on the plug white is y and ground is the green terminal. In the kettle the black goes to one of the two terminals on the thermostat. Then a jumper wire from the other thermostat terminal goes to one of the two terminals on the element. Then the white wire goes to the other element terminal. The ground or green attaches to the metal surface inside.

Posted on Aug 21, 2016

  • Marks concession repair

    The wiring good the kettle is pretty simple. Black goes to x on the plug white is y and ground is the green terminal. In the kettle the black goes to one of the two terminals on the thermostat. Then a jumper wire from the other thermostat terminal goes to one of the two terminals on the element. Then the white wire goes to the other element terminal. The ground or green attaches to the metal surface inside.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Trying to find kettle wiring drawing 3255

To order a manual from the factory the part# is 67834. Depending on how old this is , those kettles and or similar design had a issue with the nut comming loose that holds down the thermostat thight to the bottom of the pan. The loose nut would then bounce around in there until it touches a elect.connection and ground at the same time. It will short circuit the kettle and end up welding itself in place . so when you turn the kettle on it trips the circuit rite away. you have to dissasemble it and remove it . there is a new locking type nut avalible to replace it.
tip

Kettle stoped working...

After the warranty was over, our beautiful electric kettle just stopped working.
Toastess International Kettle
Model: TJK-103 120V, 60 Hz, 1500 W
Here is what I did to fix the problem.
Unplug the kettle and empty it completely.
Remove excess residual water inside.
Remove the bottom cover by removing the screws holding it.
Check the wires inside, the ones connected to the heat element.
On our kettle, one of them was completely burned off and disconnected.
So I replaced it with a heavy duty equivalent copper wire and sauder it in place.
Make sure that you do a good job installing and replacing the new copper wire.
Kettle is now fixed and working perfectly.
0helpful
1answer

I have a # 2010 when i turn kettle on it trips the reset button even when i unplug kettle

There is a wiring short somewhere, likely in your kettle, be brave and take it apart, it has insulated wiring that sometimes scortches and exposes the wiring causing the short You can purchase insulation beeds or new wiring direct from the dealer.
0helpful
1answer

Popcorn maker worked great for a matinee then for the evening show the kettle no longer heated up

Your kettle has had a ground fault, and damaged the switch in the process. Do not Continue to Try and use.

Take the kettle to a gold medal dealer, and replace the switch in the cabinet.
0helpful
1answer

Need to hook up wire for the element in the kettle of my GR6A1X -XX -X

Here is the wiring diagram for that model. Black(hot) wire to empty side of thermostat, red(indicator lamp) wire is doubled to the wire that goes to heat element, and the white wire is attached to far end of heat element.
2_18_2013_6_54_35_pm.jpg
0helpful
1answer

How can i rewire a lpg bunn coffe grinder? i ordered it on ebay and the wiring and parts were not connected when it finally came, please help!

the wiring diagram should be inside the grinder pannel.

if not then take modal number and call BUNN
or go to BUNN website

please rate my work
2helpful
1answer

My kettle suddenly stopped working, it still shows a red light when you go to boil the water but the water does not boil. its only a few months old so what would cause this problem

sounds as if you have a lose wire in the base or else you element has failed. Undo the bottom of the kettle and check all wires are connected to the element. If all the wires are connect i would say your element has blown.
0helpful
1answer

Sunpentown SP-3000 Hot Water Pot Dispensing Button No Longer Work

http://www.eserviceinfo.com/download.php?fileid=30158

Basically all eletric hot water pots are the same just like frig/stove.

pdf with wiring and parts.

Enjoy.
Not finding what you are looking for?

935 views

Ask a Question

Usually answered in minutes!

Top Star Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

685 Answers

Steve

Level 3 Expert

3290 Answers

Brad Brown

Level 3 Expert

19166 Answers

Are you a Star Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...