Admin password - Sharp MX-2300N Color Copier

Hi,
For D-LINK default password you can try one of these:
Username: admin
Password: admin

Username: admin
Password: blank (just press enter after typing in the username)

Username: admin
Password: password

factory default password and username
User: leave it in blank Password: admin
or
User: admin Password: admin

Hi,
Default settings will be as mentioned below....
IP address: //192.168.1.1
Username: admin
Passsword: password

Thanks,
Satheesh

Plug the router into the power socket and configure you own machine to obtain IP address automatically. Load up Internet explorer and type in http:/192168.xxx.xxx which is the local address of your router. You should then get a password screen. Enter default user name and password and it will take you to the configuration screen. The full IP address and user name and password are dependant on which model you have. See list below From there you need to read the instructions very carefully and match it with the information provided by your ISP.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe
? Q: What is the default IP address, username, and password for routers? ? A

ZSR0104
192.168.8.1
Administrator password: admin

ZSR0104M
192.168.1.1
Login password: No Password

ZSR0104B
192.168.1.1
User Name: admin
Password: 0000

ZSR0104AS-01
192.168.8.1
Administrator password: No password

ZSR0104E
192.168.2.1
Login password: No Password

ZSR0104CP (Grey color)
192.168.1.1
User Name: admin
Password: admin

ZSR0104CP-05 (Blue color)
192.168.10.1
User Name: guest
Password: guest

ZSR0104WE-01
192.168.2.1
Login password: No Password

ZSR0104WE-04
192.168.2.1
User Name: admin
Password: 1234

ZSR0104WE-05
192.168.1.254
User Name: admin
Password: 1234

ZSR1104WE
192.168.2.1
User Name: Empty
Password: Empty

ZSR0104DE
192.168.2.1
Login password: No Password

ZSR0104FS
192.168.1.1
User Name: admin
Password: admin

ZSR0104UP
192.168.1.1
User Name: admin
Password: 0000















I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Levelone - FBR-1161A (Levelone Firmware) admin admin Levelone - FBR-1418TX (Levelone Firmware)
admin Levelone - WBR-3405TX (Levelone Firmware) admin admin Levelone - WBR-3406TX (Levelone Firmware) admin admin Levelone - WBR-3408 (Levelone Firmware) admin
Levelone - WBR-3800 (Levelone Firmware)
password Levelone - WBR-6000 (Levelone Firmware) admin password Levelone - WBR-6001 (Levelone Firmware)
password

pankystu,

The default username and password for most routers is:
username- admin
password- admin

OR

username- administrator
password-

Hope this helps.

-S

there is a small reset button that u will need to push with a pen. Its usually to the back or side of the router.

Just jeep pushing it until the router resets then use the default username and password.

defaults. (normally)
user name - admin
password - admin

username - Admin
password - admin

username Admin
password Admin

user name Admin
password (blank)

username admin
password blank

look in your manual for the default username and password and instructions on how to reset.

Default login combinations are usually; Username: admin Password: {blank} Username: admin Password: admin Username: admin Password: pass Username: admin Password: 1234 Username: {blank} Password: admin Which make/model is your router?

Use default username and password, should be found under the router.

Try:

Username: admin
Password: admin

Username: admin
Password: password

Username: admin
Password: sky

Username: admin
Password: (blank no password)