I have a Sharp copier that developed an Error code when it is turned on. The Error code is H3-00. Any help would be appreciated.
H3-00 means there was a problem in the fuser unit of the copier - a temperature problem. The correct temperature is not reached within a certain time.
It could be a thermostat or thermistor problem - both monitor temperature. you could remove the fuser unit and make sure these items are clean - no build up on them. there should be a center and side thermistor.
You can reset the error code in SIM mode by pressing the following keys one after the other "P" "interupt" "C" "interupt" then 14 and start/copy key. confirm if required. make sure the copier is restarted afterwards.
If the error persists then you may need new thermistors.
Hope this helps.
5,284 views
Usually answered in minutes!
Thank you very much! I entered the reset code and it works great!
Thanks again.
CE-00 error code solutions. thanks
×