Question about Washing Machines

3 Answers

Washing machine nec nw-652

My washing machine will only spin when it feels like it sometimes it will others it will show OE on the display

Posted by elise_351 on

  • elise_351 Jan 10, 2008

    Thank you i have fixed it now

  • jessica1985 Jun 05, 2008

    Hi, I have just bought a second hand 3yr old NEC nw-652 as well and I am having the same issue. It will stop before the spin cycle and it makes these massive jolts which put the clothes on one side and always makes it uneven. I eventually did get it to complete the spin cycle but the clothes are still saturated and considering it will be pouring rain for the next week, I doubt they'll ever get dry.

    This is a really bad washing machine. It takes 90mins to do a cycle! How do I fix this, if possible?

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am having the almost the same problem with what i have, if it is turn, the water will just keeping on pouring in non stop, it does matter wether it is wash, rinse, dry or spin the water will just keep on pouring in at all time, it is not a good machine at all.

Posted on Oct 15, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the exactly the same problem and then got to the stage that it wouldn't work at all. So i looked it up in the manual and found out that it was the filter, (and thats not the lint filters like i originally thought lol) so i cleaned it out and now it works better than new. Hope this helps you cos it was such a relief that i didn't have to buy a new one.

Posted on Jan 10, 2008

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

We have NEC NW-652 washing machine, we set the water level and start the machine, when the machine reaches the set water level it continues to fill and the machine starts to work

Steven

Posted on Dec 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My LG washing machine is showing OE fault what do it mean ?


OE means uneven load.
If you can open door, put a dry towel in with the washing and try spinning again ...

Nov 20, 2017 | LG Washing Machines

1 Answer

WASHER DISPLAYED "OE" NOW IT WILL NOT DO THE SPIN DRY


Hi there, my mum actually had that problem with her LG washing machine, we did clean out all the drains and hoses just like you did, and also checked the pipes for any damages(cracks/ bends). Turns out the cause was that the machine just wasn't sitting level, so it wasn't draining out properly. Water just collected inside the front of the machine causing that error. Check if the machine is level, and while you're at it check your filter for clogs.

Mar 08, 2014 | Kenmore Washing Machines

1 Answer

My washing machine is giving me code OE. it is not not spinning. checked the belt and it is fine. any help would be great. thanks kylie


Hello & Welcome to FixYa

OE is a drain error and is displayed when the washer is unable to drain water. Please check the drain hose and drain pump filter for any clogs to clean the error. Please get back to me if you have any other questions.

Kevin

Jul 30, 2011 | Washing Machines

1 Answer

Machine doesn't drain & spin, it says "OE" or sometimes some other message "E something"


Hi,
Here is a tip that I wrote that gives more detail about how to fix the OE codeon LG washers....

LG Washing Machine OE Error Code
heatman101

May 23, 2011 | Washing Machines

1 Answer

Wash cycle works ok but will not spin and oe appears in digital display then it switches off. We have just had drum and shaft and bearings replaced, repair man ran it then when we trid to use it it has...


This is what "OE" Means :

"OE" Drain error. Cause: not fully drained within 10 minutes Check there isn't a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot wash with 1/2 a cup of vinegar will remove this sludge

Feb 09, 2011 | LG Washing Machines

1 Answer

My washing machine stops mid wash and on d LCD display it has the letters OE sometimes the machine doesn't spin an if t does the cycle it doesn't let the fabric conditioner go n the was


An OE error presents if the washing machine has not successfully drained the water in ten minutes. However, the OE error code does not always mean that the washer requires a service call. If periodic maintenance has not been performed on the washer, there are a few simple steps to take before calling for service. Clear the filter located on the bottom left on the face of the machine. You will find a access panel located there that you need to open. richroth_61.gif Happy Holidays The FixYa Team

Dec 19, 2010 | LG Washing Machines

1 Answer

During a wash cycle, the washer will not spin, and displays the message OE after a few minutes of the motor running, but no spinning.


OE drain error. Water not drained after 10 minutes. Look for junk in the filter or pump.

more HERE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Oct 29, 2010 | LG WM2455 Front Load Washer

2 Answers

My washing machine showing an OE error before end of cycle


OE error is noyhing but an Outlet Error.. OE simply means “the pump is blocked”. Clean and straighten the drain hose / clean the drain filter. Check the hoses (drain hose) and the pump filter but if it didn't cure the problem then turn the thing upside down and strip the pump out of it check if anything is caught in the impellor.. if so remove it and everything will be fine..

Jan 18, 2010 | LG WM-2277HW Front Load Washer

1 Answer

OE fault displayed on spin cycle LG 1019BD 10KG WASHING MACHINE


The LG error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this error means as far as the washing machine is concerned it thinks the water isn't pumping out. A pump, or filter blockage is the most common cause but it could be caused by other faults such as a faulty pump, or even a blockage in the drain hose or somewhere else in the system etc.


LG themselves have some information on this error code..

http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6273

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 29, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,427 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18626 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...